Ender 3 S1 Creality LED Light Bar Top Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mod to reposition Creality Light Bar to allow for other mods that use the top corners.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 76
- Makes
- 1
- Views
- 1,110
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Make sure to copy, paste, and mirror the model so you have left and right.
I included a .3mf of both left and right.
This is a remix to reposition the Creality Light Bar mounting location to the top of the printer, avoiding the top corners and allowing other mods that would otherwise interfere.
There is 30mm of clearance from the front of the printer.
The hole in the 2020 section is 4.5mm so an M5 screw will thread into it. The hole for top of the printer is 5mm, I used 10mm M4 screws with drop in nuts to mount to the top, and 10mm M5 screws to affix the light-bar to the printed mount.
Please let me know if anything needs to be changed!