BIFRC spot welder snap fit case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a snapfit case for the BIFRC spot welder. No mouting screws are required. The case is a tight fit, without…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 18
- Makes
- 0
- Views
- 125
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is a snapfit case for the BIFRC spot welder. No mouting screws are required. The case is a tight fit, without visible gap between the case and the lid. There is a button and a hole for the LED.
I used a bit of hotglue to cover the hole for the LED so the light from the LED will lightup through the semi transparant hotglue (if you don't use to much ;) )
The pcb doesn't rattle inside the case as it is kept tighly in its position.
Print Settings
Printer Brand:
Ultimaker
Printer:
Rafts:
No
Supports:
Yes
Resolution:
0.1
Infill:
25%
Filament: Colorfabb PLA Black & Red
Notes:
I used Cura to slice the model and used tree support as it is easier to remove than the traditional support and also uses less material
Category: Electronics