1 / 9
X3D Riser Lite 58mm high
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lower profile riser.
- Rating
- 4.5 / 5
- Likes
- 86
- Downloads
- 464
- Makes
- 2
- Views
- 6,809
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Check my FB group if you need more info after reading below.
Again a riser but this time one which is in line with the outer lines of the machine.
I have tested it with the X1C and the P1S and glass fits perfect.
You will need 4 top connectors and 4 bottom connectors to fuse the 4 sides together.
Print in aby filament of choice, ABS, PETG for higher temperatures or just PLA/PLA+ for daily PLA use.
Led driver used for this riser is a Zigbee 12v non-rgb