Monster Toilet Paper Holder
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.65 – €0.79 net (excluding VAT)
For file: Toilet_Paper_Monster_Eyes_0.2mm_PETG_MINIIS_34m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.72 excluding VAT (range midpoint).
- Weight reported by the author
- 13 g
- Print time reported by the author
- 34.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
For those who *really* want to keep that last spare roll safe...
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 30
- Makes
- 1
- Views
- 343
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I really liked LightXaber's Monster Paper Towel Holder and plan to use it as my White Elephant present at the office holiday party.
When I went to print it, I noticed that the base was going to require a lot of support. I looked through the comments and saw AAR's suggestion to separate the legs and…voila!
Printing Notes
- My initial print of the new, separate leg was fairly rough on the underside. On my second go-around, I used a snug support, and it was better, albeit not perfect
- You need to print 4 legs and 13 clips