1 / 2
TPU Tie Rod Boot
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 3D printed tie rod dust boot for my 2003 Honda CR-V
- Rating
- 5 / 5
- Likes
- 63
- Downloads
- 183
- Makes
- 2
- Views
- 1,596
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
A TPU dust boot to replace ripped, dry-rotted, tie rod end boots. I designed these to fit my 2003 Honda CR-V, but they may fit other models.
The large end is 28.5mm for a snug fit over the 30mm end of the tie rod. The small end is 12.7mm (½").
The model uploaded here is slightly different than the one shown in the video.
Print with the small end on the bed. I used a 3-row brim to help it stay attached during printing.
Update 01/15/2025 : Thirteen months later, the boot is still holding up. No splitting or grease leaking out.
Update 01/05/2026 :