1 / 10
ESP8266 - NodeMCU V3 - Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a case for the NodeMCU V3 - ESP8266 . It includes clearance for GPIO cables. The cap is "clicked" into place.
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 294
- Makes
- 2
- Views
- 1,402
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This is a case for the NodeMCU V3 - ESP8266
(e.g. for AZ-Delivery ESP8266 NodeMCU Lolin V3)
esp8266_case_box v5: added two holes to mount box with screws on a plate (e.g. with 2xM2).
I hope you like the model! → Makes and Comments are very much appreciated :)
Features:
- Easy and fast to print
- Some space for cables / parts within case
- The ESP8266 can be placed either with reset /flash button up or down. If placed up, there are two holes to press these buttons even with closed cap.
- There is clearance for the GPIOs on top of the cap. In the Box there is a hole (8mm diameter) where GPIO cables can be passed out from / to the box.
- The cap is "clicked" into place (no glue/screws needed) and can be opened again.
- The USB Port of the ESP8266 is always accessible.
Supports:
Not needed
Layer height:
Any (Example: 0.2 mm)
Infill:
Any (Example: 15%)
Filament:
Any (Example: PLA)