1 / 5
Mount for CTEK CS connect U terminal
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
2 part mount to attach a CTEK CS Connect U terminal cable connector to a pannel with a 25.4 mm hole.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 74
- Makes
- 0
- Views
- 416
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Fit the left and right part over the CS connector. The cilindric chape of the parts should be at the CTEK connector opening. Assemble the parts 2 mm from the connector front to allow for the clip of the male connector to engage.
The 2 parts are fixed with M3 bolt and nut. The assembly is designed to fit in a 25.4 mm hole and are fixed to a panel again using M3 bolts and nuts.
The design was made to be able to easily connect a CTEK trickle charger to a generator to increase battery life.