1 / 6
Ender 3 Noise Dampening Board Fan Cover — image 1
1 / 6

Ender 3 Noise Dampening Board Fan Cover

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Quite a fast print, low material usage compared to others, stock screws fit perfectly. I tried multiple shapes for the…

Rating
0 / 5
Likes
8
Downloads
139
Makes
1
Views
404
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial

Quite a fast print, low material usage, stock screws fit perfectly.

I tried multiple shapes for the fan shroud and found the one used in this design to be the most effective whilst maintaining good airflow (I managed to get a quieter design, however this made airflow nearly non-existent and produced a very annoying buzzing sound).

I have also designed it to ensure that no debris from the print bed will likely enter and be sucked in. This does not require any supports and can be printed at a vast range of resolutions without effecting structural integrity.

Please note - This is not as quiet as it can be, to make it quieter I would have to make it much shorter and increase the angle of the interior zig-zagging, which when installed, almost completely blocks all airflow causing a very frustrating buzzing sound from the fan, hence this design is a really good balance between noise and airflow.

Any feedback is greatly appreciated

--Please see Print setting notes--

Print Settings

Printer Brand:

Creality

Printer: 

Ender 3

Rafts:

Doesn't Matter

Supports: 

No

Resolution:

0.18

Infill: 

5%

Filament: N/A PLA Black


 

Notes:

 

The interior fins are generally quite fragile so please be careful removing from the printbed, I personally recommend removing by peeling from each screw hole towards the centre simultaneously

How I Designed This ===================

Fusion360

 

 

 

Category: 3D Printer Accessories

Tags