Anycubic Kobra 2 Pro camera holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Camera holding arm models for Anycubic Kobra 2 / Pro
- Rating
- 4.929 / 5
- Likes
- 175
- Downloads
- 1,486
- Makes
- 16
- Views
- 6,810
- Reviews
- 14
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution
“Front” model was the first design and it requires screws.
“Diagonal” and “side” models slide into the rails so they don't require screws. If your printer doesn't have threaded screw holes these should do the job.
Although I designed these for my K2Pro, they should fit any printer with 4040 V-slot aluminum profiles.
I also added an LED holder design on which you can stick LED strips to light up the print area.
Print settings for Kobra 2 Pro:
Nozzle: 0.4 mm
Layer: 0.2 mm
Brim: needed only for the “front” model
Supports: no
Camera mount screw that I used: https://www.printables.com/model/152911-camera-tripod-screw-14-20-unc