1 / 2
Windshield Wiper Blade Clip (Hook Type)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This replacement part will work for most hook-type mounting wipers. It connects the wiper arm hook to the wiper blade.
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 410
- Makes
- 1
- Views
- 1,855
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Share Alike
Fitment:
This part is for conventional wiper blades and hook type wiper arms (refer to diagrams):
Printing:
| Material | PETG or better (needs to withstand outdoor conditions and heat) |
| Nozzle | 0.4mm |
| Layer Height | 0.2mm |
| Infill Density | 100% |
| Infill Pattern | Concentric |
| Support | Yes |
| Orientation | Large flat side on build plate |
Installation:
- If you have not removed the wiper blade already, do so, being careful to not slap the windshield with the metal wiper arm and crack it. The old clip should pop off of the wiper blade with a little force.
- Pop the new part onto the little bar. Look at your other wiper if you're concerned about the orientation.
- Push the wiper arm hook through the slot in the blade and pull the wiper until the part clicks into the hook.
If you need to make changes, here is the onshape model.