1 / 8
Subaru LED Sign (5ft)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
LED Subaru sign that can be wall mounted, set on your work bench or your peg board.
- Rating
- 0 / 5
- Likes
- 54
- Downloads
- 126
- Makes
- 0
- Views
- 981
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
Print Details
- All pieces were designed to be printed on a Creality Ender 3 Pro or larger. (Minimum Bed Size: 220 x 220 x 250mm / 8.6 x 8.6 x 9.8 inches)
- Each letter is made up of two pieces, a base and transparent insert that the LEDs shine through
- Base pieces also have a clear insert to make the underline
- Very large pieces (Ex. Letter "A" Base) require the boundary area to
be removed in Cura such that the full Ender 3 bed can be used. Here a helpful tutorial - Two connecting blocks are used inside the bases to glue letters together
- Concentric holes between base and letter base serve as a glue point and
wire routing space - Holes are included on the back of the base pieces which can be used for wall mounting
Support my Creations, Buy Me A Coffee!
Print Settings
- Printed using PLA
- Letters and Base Pieces - 20% Infill
- Supports: Base Pieces only - Set to touching build plate
- All Letter and Plate Inserts - 100% Infill (100% was best for light dispersion
when using transparent filament)- Supports: None
- Connecting Blocks - 100% Infill
- Supports: None
Assembly Tips
- Pieces were glued together using J-B ClearWeld Glue for Plastics
- Recommended not to glue transparent letter insert in letter that holds the LED controller in case it needs replaced
- 50ft of LED lights were used (could be done with less).
- If the plastic housing is removed from the LED controller the PCB fits in the right-most letter "U" perfectly.
- Double-sided tape was used to hold lights inside letters