1 / 7
no glue no screw mechanical sliding cover shabbos mode for fridge light switch — image 1
1 / 7

no glue no screw mechanical sliding cover shabbos mode for fridge light switch

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

jews aren't allowed to turn on and off lights on the Sabbath. this an issue with many fridges since the light turns on..

Rating
0 / 5
Likes
7
Downloads
107
Makes
0
Views
1,126
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

New and improved!!!

Changes:

  • No filament cutting required! Print, remove supports and slap it together and you're good to go.
  • Added wall thickness due to cracking concerns
  • Changed critical dimensions slightly (cracking was most likely due to the model not being wide enough - off by about 0.3mm)
  • Added some chamfers to the Mounted Slot to aid in support removal

I personally use this model, so any changes I need to make will be uploaded here!

 

This model was designed for a switch with baseplate dimensions of 25mm by 30mm. 

Check for clearance before final installation.

 

For the uninitiated:

Jews aren't allowed to turn on lights on the Sabbath. This is a problem with many refrigerators, since the lights turn on automatically when the fridge door opens, and so in order to be able to use the fridge on the Sabbath, many families stick a piece of tape over the switch before the weekend.

I didn't like the sticky residue left on the fridge from the tape, nor the janky feel of that method. So I spent a couple of hours measuring, modeling, printing, fixing dumb mistakes and repeating the process until this came out!

 

Print with supports with the dovetail slots in the “Mounted Slot” file pointed upwards.

I'd recommend printing with PETG, but do whatever. If you can get away with PLA then go for it.

I like printing at 0.08mm layer height (there are some pretty small features) but you can absolutely get away with a larger layer height.

For supports I use normal autogenerated supports and toggle “On buildplate only” to on. Toggling the “Style” field to “snug” tends to use less filament and eases support removal.

Pretty sure everything else is default except for the following(all optional, comes down to preference):

  • Top Z distance: 0.25
  • Bottom Z distance: 0.08
  • Top interface layers: 4
  • Bottom interface layers: 2
  • Independant support layer height: on

 

Will attach a YouTube link with assembly/use instructions eventually, but for now, here's a link to my original Reddit post so you know how it's supposed to look. will take care of YT link eventually…

https://www.reddit.com/r/functionalprint/s/cQd2x7dZZi

For now i guess a list will do:

  1. Assembly:

After printing, you've gotta put the darned thing together!

  • remove supports
  • slide Sliding Cover into Mounted Slot, the side with the little nubs first. May take a bit of force, don't worry about it.
  • without taking it all the way apart again, slide the parts together 2 or 3 times to make it run smooth. The nubs should make sure they don't fall apart ever again, but if you ever need to take them apart you can.

     2. Use:

After assembly, you've gotta put the darned thing on your fridge!

The product photos might help more than this list, but it can't hurt to be thorough!

  • Note the small ledges or feet on the bottom of the Mounted Slot. These are what interface with your fridge.
  • Pull your fridge's door switch lightly so that there's a small space between it and the wall or ceiling (or whatever surface) of the fridge.
  • Slide the ledges of the mounted slot into the space you've made and push until, with the switch cover in the open position, the light turns back on

…and voila! no glue no screw mechanical shabbos mode for your fridge's door switch. enjoy!

 

Tags