1 / 2
Ultimate Ball Bearing Top (with Launcher)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A parametric spinning top made from old skateboard Ball Bearings with a BeyBlade-style launcher.
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 147
- Makes
- 1
- Views
- 1,219
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Important: Check out the original model in order to get a proper idea of how to print the top itself either with a parametric approach (check the .3mf files below).
The Ultimate Ball Bearing Mini Top, beigoma style.
Parts and requirements
- Top (Bottom and Top part):
Infill 100%; “External Perimeters” and “Perimeters” Line Width of 0.21 or less required for the gear to work properly; PLA or PLA+ recommended; print them individually in order to reduce stringing issues; - Launcher:
Infill 30-50%, PLA or PETG recommended; - Launcher String:
Infill 100%; >3 perimeters required; “External Perimeters” and “Perimeters” Line Width of 0.21 or less required for the gear to work properly (0.16 recommended with 0.25mm nozzle); Nylon, PETG or PLA+ recommended.
Assembly
- The top and bottom parts of the Top should snap fit into a standard stakeboard bearing outer ring, if not modify the parametric model and retry.
- Snap fit a steel ball from the bearing in the bottom part. Follow the instructions on the original model if necessary.
- Insert the Top into the launcher and carefully thread the String by rotating the Top counterclockwise, some sanding maybe required inside the launcher ingress and egress.
Usage
Rip it like it's 2005 inside a concave container or an old ashtray.
Edit:
Spins up to 8 minutes!!