1 / 2
Polymaker / Polyterra spool adapter with RFID slot (for Bambu Lab reusable spool / AMS)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remix adding a slot for the RFID tag from Bambu Lab filament.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 41
- Makes
- 0
- Views
- 1,098
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Originally posted from the original by philltran - https://www.printables.com/model/339966 - additional steps in italics.
Each spool requires one core adapter.
- Remove the RFID tag from the original Bambu Lab cardboard core that you wish to reuse - make sure to remember which side of the tags face outwards
- Remove one cardboard sides off of the original spool.
- Place the spool on a sturdy surface with the open side facing up.
- Insert the adapter into the center of the spool. Make the edge of the adapter flush with the edge of the cardboard core. The adapter has a slot to line up with the notch on the Bambu reusable spools. Make sure slotted side of the adapter is facing out
- Add the RFID tag removed earlier through the thin slot - it may be quite tight if some glue remains from the original tag. Fold the tags up to lie flush with the new filament
- Separate the Bambu reusable spool into two parts.
- Insert the Bambu spool section with notch onto the spool core so that the notch lines up with the slot on the adapter.
- Holding the spool together firmly, flip over the spool so that the remaining cardboard side faces up.
- Remove the remaining cardboard sides off of the spool.
- Insert the remaining Bambu spool section onto the spool core.
- Rotate the Bambu reusable spool sections until the two sections “click” together.
Originally remixed from Dustin Tebo's Protopasta Bambu Lab spool adapter (https://www.printables.com/model/320144-bambu-lab-spool-adapter-for-protopasta-spools/remixes)
Direct remix of philltran's Bambu Lab Spool Adapter for Polymaker PolyTerra Cardboard Spools