Light Switch Locks with NEMA 5-15 and Nightstand Icons
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lock to prevent accidental toggling of a light switch that shouldn't be used.
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 32
- Makes
- 1
- Views
- 279
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
I thought it would be helpful to have icons indicating that electrical sockets are controlled by the switch, but also made some indicating that nightstand power is drawn from the wall sockets. I put all models on one plate for convenience, just print which you need from the single STL file.
I used PETG with the following settings, but Generic PETG settings (or even PLA) is probably fine too.
Printer: Bambu X1C
Filament: Printed Solid Jessie White PETG 1.75mm
Nozzle: 0.4mm
OrcaSlicer Settings
Nozzle First layer: 255°C
Nozzle Other layers: 265°C
Textured PEI Plate: 85°C
Layer Height: 0.12mm
First layer height: 0.2mm
Sparse infill density: 99%
Sparse infill pattern: Gyroid
Based on MakerBlock's model at https://www.thingiverse.com/thing:70587