Silicone Wiper with Brush for Bambu X1C, P1P and P1S
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of Brenyo's Silicone nozzle wiper changed to allow for a 2mm sheet and also added A1 Mini brush holder
- Rating
- 0 / 5
- Likes
- 31
- Downloads
- 96
- Makes
- 0
- Views
- 3,241
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
This should be printed in ABS or ASA to prevent warping under higher chamber temperatures
Also print this with the back side faced down for best strength with tree supports on auto. You can see my top layer lines to see the orientation I had it printed in.
This is a remix of Brenyo's silicone nozzle wiper, I have 2mm silicone on hand and not 3mm, so I modified the slot to accomodate what I had. While I was at it I also added a place for the A1 Mini nozzle brush to sit in for extra wiping action, just cut the brush down to where it is 3 bristles long (approximately .250" or 6.5mm) and glue them in place as pictured
I uploaded 3 different models for your choosing, one with just the silicone sheet for a 2mm thickness and no brush, and then 2 with the A1 Mini brush installed with either 2mm or 3mm sheets. You can find the original 3mm with no brush in the original creators profile
The sheets need to be cut 12mmx14mm just like the original.
Here are some links for the silicone sheet I have (2mm) and the A1 Mini Brush
A1 Mini Brush- https://us.store.bambulab.com/products/heatbed-nozzle-wiper-a1-mini
Note- I believe the A1 and A1 Mini nozzle brushes are slightly different in size, but I do not have an A1 brush to reference