1 / 21
Tin Can
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tin can container with the divider inserts. 🥫
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 108
- Makes
- 2
- Views
- 367
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Suggested print settings for Can:
- Layer height 0.2mm.
- Infill 15%.
- Perimeters: 3.
- No supports are needed but follow the suggested print orientation for ideal results.
Suggested print settings for Divider Inserts:
- Layer height 0.2mm.
- Infill 15%.
- Perimeters: 5 (for strength and aesthetic).
- No supports are needed but follow the suggested print orientation for ideal results.
NOTE
Most of our designs are printed and tested on a Prusa Mini and MK4, so tolerances may vary if you are using a different brand. While we strive for a smooth experience with our designs, we appreciate your understanding if tolerance issues arise.