Big Print button for a push button
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
NOT USELESS ANYMORE! Modified this print button to start up my raspberry pi 3 which has my octoprint
- Rating
- 5 / 5
- Likes
- 37
- Downloads
- 513
- Makes
- 1
- Views
- 3,272
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
base.stl and top.stl printed 10% infill
top.stl print it with the letters down to the bed no supports needed
for the base.stl supports only in the middle the other overhang sections dont need support use support blockers as in picture below
tab.stl(print x4) at 100% infill glue to the top part
used a 9x32 mm spring (uncompressed)
it can fit a push button this type and use its washer from below the base to fix the push button to the base https://vm.tiktok.com/ZM6nmHBVx/
This is the button secured inside the base
The cables of the push button come out under the base like this
The spring inside the top part
