1 / 5
Kabelmakierer / Cable Marker — image 1
1 / 5

Kabelmakierer / Cable Marker

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€1.14 – €1.40 net (excluding VAT)

For file: kabelmarker_base_0.6n_0.25mm_PETG_MINIIS_1h0m.bgcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €1.27 excluding VAT (range midpoint).

Weight reported by the author
23 g
Print time reported by the author
1 hr
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Zum markieren von Telefon- oder Satkabeln. / To mark your telephone or sat wires.

Rating
0 / 5
Likes
0
Downloads
31
Makes
0
Views
349
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

Es gibt so viele Kabel in dem Haus in dem ich wohne, dass ich jedesmal von neuem anfange das richtige Kabel zu suchen. Markierungen mit Klebeband oder Stift vergehen mit der Zeit oder sind so unleserlich, dass ich dann doch wieder anfange die Drähte durchzuklingen.

Mit diesen Markierern soll damit Schluss sein. Jeweils am Anfang und am Ende kommt einer auf das Kabel und damit ist klar, welches Kabel wo ist.

Die oberen und unteren Teile sollten separat gedruckt werden.

Beim drucken der oberen Teile sollten mindestens zwei Layer (das 2. und 3.) weiß gedruckt werden, sonst ist es mit der Lesbarkeit nicht so weit her.

Die Telefonmarker passen gut auf Cat-5 Kabel oder Telefonkabel mit 5,7 - 6,5 mm Durchmesser. Die Satmarker sind für Kabel um 7mm Durchmesser gemacht.

-------------------

There are too many cables in my house. I always have to search which one is for what. Now, with these markers this should have an end.

Print the tops and bottoms separate. When you print the top parts then print at least 2 layers (the second and third) in white, otherwise the readability is very limited.

The parts with the telephone suits cable diameters from 5.7 to 6.5 mm, i.e. Cat-5 cables. The sat markers are for cables with a diameter around 7 mm.

Happy marking!

Tags