1 / 12
DIY Cheap Lab Power Supply 5A/30V
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy to build lab power supply from cheap eBay parts.
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 99
- Makes
- 0
- Views
- 1,171
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Easy to build lab power supply from cheap eBay parts.
What you will need:
- Power Supply unit: eBay Search
- Spare laptop power supply (I use one with 19.5V DC / 4.9A)
- Some black/red/yellow wires (from old PC power supply)
- Female banana panel plugs: eBay Search
- On/off panel switch: eBay Search
- 4pcs 3x15mm countersink self-threading screws.
- Printed case (this model).
- Solder iron.
Note: Max. output voltage is limited to input voltage - 0.5V. Using the suggested laptop power supply will give a max. output of 19V.
Great for metal plating as it has the fine control for current needed for best result.
Follow photos for assembly.
Model shown is printed in Devil Design grey PET.
Updates
2021.01.29: Added model with ventilation slots for high power modules.
>> If you like it, please leave a rating, a like or maybe a donation :)
Print Settings
- 0.20mm layer height, 15% infill
- 2 perimeters, 3 top and 2 bottom layers
- No support or elephant foot compensation needed