Quad Magnetic PTFE Coupler
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.21 – €0.26 net (excluding VAT)
For file: Quad Magnetic Coupler Final_0.2mm_PLA_MK3S_17m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.24 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 16.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
4 Magnet configuration Coupler for PTFE Tubes
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 88
- Makes
- 2
- Views
- 497
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
There were 2 genius ideas I was inspired by. 1 was this by @linearcline the other was https://www.printables.com/model/695848-ptfe-joiner-for-8x3-magnets-and-pc4-m10 I disliked having to have different poles for different connectors so I chose to use the 4 magnet design which aligns automagically and is interchangeable. I added a male thread that works with PC-M10 connectors so you can print your own nuts to match or order some. Put the thread through the dry box and you will have a magnetic coupler that is easy to attach. I also used the magnets at the back which is easier to print and requires no glue at all. Happy Printing!