Screen repair clamp
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.16 – €2.64 net (excluding VAT)
For file: Screen repair clamp_0.4n_0.15mm_PLA_MINIIS_2h30m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.40 excluding VAT (range midpoint).
- Weight reported by the author
- 28 g
- Print time reported by the author
- 2.5 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
You can use these clamps when replacing a screen / digitizer to hold the screen in place while the glue sets.
- Rating
- 5 / 5
- Likes
- 31
- Downloads
- 386
- Makes
- 4
- Views
- 1,175
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- BSD License
You can use these clamps when repairing for instance an iPad screen and you need to clamp the edges while the glue sets.
I recommend using automatic support painting on the C part of the clamp and using organic supports. When printing in this orientation the threads don't come out as nice, but the part is much stronger. There's sufficient slop in the threads that a little bur doesn't matter.
The pad snaps onto the screw.
When replacing a screen, don't clamp down to hard! Use at your own risk :)