Bath sailboat 2.0, vase mode, fully functional toy in <30 mins
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.08 – €0.10 net (excluding VAT)
For file: sail_0.2mm_PLA_MK3S_6m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.09 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This sailboat for the bath prints fast! Vase mode body and mast, single layer sail.
- Rating
- 5 / 5
- Likes
- 85
- Downloads
- 436
- Makes
- 2
- Views
- 1,626
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution
Print the boat in vase mode, and the sail in regular mode.
The sail is one layer thick at 0.2 mm. It is a little tricky to grasp off the print bed just because it is thin. Once you have a corner off the bed, it should come off easier. Make sure to let it cool so you don't permanently bend it as you pull it off.
The mast is a bit wiggly as it prints, resulting in some surface roughness. This may be mitigated somewhat by keeping the print area ventilated (so it cools faster) and by slowing down the print for the mast portion. But it works well at full print speed if you don't mind the minor imperfections.