Angle Finder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
measuring tool used to find interior and exterior angles
- Rating
- 4.5 / 5
- Likes
- 289
- Downloads
- 669
- Makes
- 8
- Views
- 3,821
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Assembly
Insert nuts into hexagonal holes
Take the pointing arm, and place a washer in the recess closest to the pointing end
attach the pointing arm to the protractor by inserting a 3M x 8mm screw into the hole you just inserted the washer in and tighten.
Take another washer and place it in the bottom hole of the pointing arm. Insert an M3 x 16 mm screw then take a spacer and align it with the screw. Now take the horizontal arm and screw it on with the squared side facing right now align the hole and tighten.
Place a washer in the chamfered side recess and insert a 3M x 8mm screw.
Align the bottom hole of the left arm and tighten.
Insert an M3 x 16 mm screw into the left hole of the protractor take another spacer and align it with the screw.
Align top hole and tighten.
Printed parts
x 1 protractor
x 1 pointing arm
× 1 horizontal arm
× 1 left arm
× 2 spacers
Hardware
×2 M3 × 8mm screws
×2 M3 x 16mm screws
×4 M3 nuts
×3 M3 washers