Portable LED Flashlight
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.80 – €0.98 net (excluding VAT)
For file: portable-flashlight_0.4n_0.3mm_PLA_MK4IS_40m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.89 excluding VAT (range midpoint).
- Weight reported by the author
- 16 g
- Print time reported by the author
- 39.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
It only takes a CR2032 battery and a LED to build this portable flashlight.
- Rating
- 5 / 5
- Likes
- 26
- Downloads
- 135
- Makes
- 1
- Views
- 859
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Share Alike
Portable Flashlight
It only takes a CR2032 battery and a LED to build this portable flashlight. The LED is attached to the portable-flashlight-led-clip which makes contact with the battery when the portable-flashlight-slider is moved upwards.
Works fine with both PLA and PETG
Assembly instructions
Make sure to slightly bend the portable-flashlight-led-clip outwards so that it looks just like the following picture:
Once the LED is attached to the clip, the portable-flashlight-battery-holder can be partially inserted into the portable-flashlight-base
The portable-flashlight-slider should now be inserted together with the battery into the battery holder
The battery holder can now be completely inserted into the portable-flashlight-base
The LED can now be inserted into the portable-flashlight-base
The small hole on the portable-flashlight-lid must be facing the slider and must be twisted in order to stay in place
You should now have a working portable flashlight. I would really appreciate to see your print and some constructive feedback.