1 / 10
Taurus Voolcano Cooling Duct for Creality Sprite Extruder, Dual 5015 Fans, Ender 3 S1/S1 Pro/S1 Plus Sonic Pad sensor mount heatbreack cooling 4010 fan
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A modifified Taurus cooling duct for voolcano heatblock. Modified heatbreak cooling and sonic pad sensor mount.
- Rating
- 5 / 5
- Likes
- 86
- Downloads
- 441
- Makes
- 1
- Views
- 5,879
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
It's a modifified Taurus cooling duct to be used with a voolcano heatblock and nozzle.
I've also made heatbreak fan mode that uses stock 4010 fan (it's lighter than the stock setup).
If you print from ASA/ABS remember to scale model for shrinkage or it might be tight.
It should print in PETG without supports. With ASA/ABS interior of the duct could require some supports.
I'm adding to the package the Sonic Pad sensor mounting that is designed to be mounted to the nozzle.
- Assemble it with M3 screws and nuts.
- You can use it for bed and hotend mesurement.
- Before starting the mesurment home all axis and raise Z (for exaple 100mm) to mount sensor on the nozzle.
- Put something under the probe/crtouch to prevent crushing to the bed while probing.