1 / 2
AD5M/PRO Toolhead Duct
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stock replacement toolhead duct for Flashforge AD5M or AD5M Pro
- Rating
- 5 / 5
- Likes
- 97
- Downloads
- 375
- Makes
- 3
- Views
- 4,292
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
Replacement toolhead duct for Flashforge adventurer 5M/ 5M Pro. Has beveled exterior surfaces for better printability and aesthetics. There are both normal and mouse ear versions. No support needed but does need to be able to bridge the center cavity. Print in ABS, ASA, or PETG etc. Use .10-.15mm layer height. Stock fan is riveted on. You may want to countersink the fan mounting holes on the new fan to use flush 2mm screws.
Hardware:
2ea 5x3mm Magnets
1ea 5015 Blower Fan (not modeled off of stock fan, I used a winsinn fan)
2ea 2mm screws