Overhead ESP32-CAM Door Mount for Printer Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.67 – €3.27 net (excluding VAT)
For file: ESP32-CAM_TopWebCam_Mount_Robagon3D_0.2mm_PETG_MK3S_3h14m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.97 excluding VAT (range midpoint).
- Weight reported by the author
- 34 g
- Print time reported by the author
- 3.23 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is an ESP32-CAM case that mounts to the top of the inside glass of a 3D printing enclosure and prints wo supports.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 83
- Makes
- 1
- Views
- 993
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an ESP32-CAM case that mounts to the top of the inside glass of a 3D printing enclosure and prints without supports. This case fits Version #1 of the MCU board as described by detailed JohnyHV HERE. It may fit version #2 but I haven't tested it.
This mount was specifically designed to fit a NavePoint 18U 600mm Depth Networking Cabinet with a4mm thick glass door, but it could probably work on other enclosures. This is another accessory that for my rack mount enclosure, more details and models HERE.
Print Settings
- Material: PETG
- Nozzle Size: 0.4mm
- Layer Height: 0.2mm
- Perimeters: 2
- Infill: Gyroid 5%
- Supports: None
ESP32-CAM Software
This is a great little piece of software, by JohnyHV, that connects the ESP32-CAM to your PrusaConnect account. It requires the Arduino IDE to compile and load to the board but it is pretty straight forward if you follow the instructions: PrusaConnect_ESP32-CAM.
ESP32-CAM Hardware
I go the USB-C version of the ESP32-CAM board from Amazon. This appears to be Version #1 of the MCU board as described by detailed JohnyHV HERE.
Encouragement
If you like what I'm doing consider buying me a coffee:
Buy me a coffee
Sample Image
