1 / 4
NanoPi Neo3 case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Nanopi Neo3 case with heat-sink and 3010 5V fan.
NanoPi Neo3 purchased from aliexpress {package 4).
Printed on Creality K1 using ERYONE Filament ASA,
Creality print settings:
Layer height: 0.2mm
Print temp.: 255°C
Bed temp.: 100°C
Printing speed: 200mm/s
Infill: 15%, triangles
Support: normal, Zig-Zag
Adhesion: autobrim
Assembled using:
M3 x 25mm Socket Cap Head Screws (DIN 912) - A2 Stainless Steel
and
Silicone Bumpers, 6 × 2mm Self Adhesive Rubber Pads