1 / 12
Case for 4-1 Retro Game Console Kit HU-001 SH00108 — image 1
1 / 12

Case for 4-1 Retro Game Console Kit HU-001 SH00108

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is an easy-to-print case for the DIY retro-gameconsole, like the one here: https://www.roboter-…

Rating
0 / 5
Likes
3
Downloads
29
Makes
0
Views
183
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

This is an easy-to-print case for the DIY retro-gameconsole, like the one here: https://www.roboter-bausatz.de/p/bausatz-diy-retrokonsole-tetris-snake-racing-space-shooter

As mine came without a case kit, I designed one in Tinkercad.

See thePost-Printing-Section for assembly instructions.

Print Settings

Printer Brand:

Creality

Printer:

CR-6 SE

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

20%

Filament: your choice PLA your choice Post-Printing =============

Assembly is self-explaining....

Just print the two halves, install the PCB in the upper half (three small screws needed - btw: who designes a PCB layout with only 3 mounting holes???).
(the screw holes in the upper half are designed kind of slots, so you can adjust the PCB position to align buttons with corresponding holes!)

Then use a double-sided adhesive tape to fix the battery holder inside the bottom part.

Put both parts together - make sure the TOP marking on the lower parts points to the top, because there is a support column for the PCB in the bottom case to compensate for the missing 4th screw.

There you are!

PS: I attached a red plastic sheet between case and LED displays to enhance contrast of the display. I salvaged that from a plastic file cover and fixed it with small melting points made with my soldering iron...

Category: Electronics

Tags