40mL vials stand, sonicable
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.91 – €1.12 net (excluding VAT)
For file: top_0.4n_0.2mm_PETG_MINI_1h8m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.01 excluding VAT (range midpoint).
- Weight reported by the author
- 11 g
- Print time reported by the author
- 1.13 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Laboratory stand for 40mL vials (27.4 mm diameter), for use in ultrasonic bath.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 38
- Makes
- 0
- Views
- 234
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Chemistry & Biology
- License
- Creative Commons — Attribution — Share Alike
Laboratory stand for 40mL vials (cca 27.4 mm diameter), for use in ultrasonic bath.
Printed from PETG, 0.4 mm nozzle, 0.2 mm layer height, no supports.
Print 1x top, 1x middle (top and middle are identical), 1x bottom and 12 feet. Assemble by sliding the feet on the borders via corners, 2 feet per side. It can be a bit tricky to position the feet correctly, not upside down. When fully assembled and aligned, feet might be secured in place by thawing the ends a bit, e.g. with hot paperclip (Be careful, don't burn yourself, use appropriate means of personal protection ;-)).
I hope, you'll find the model useful :-)
If you'd need to adjust anything, there are SolveSpace files included.