Counting matching models…
This rack was designed to fit inside of a small wooden box to hold and display vials that contain perfume samples. The rack measures 100mmx102mm, just under 4" square, and holds 16 of these small vials. The vials can be up to 12.5mm in…
Print approx. €3.11–€3.80 excl. taxPreliminary estimate for one variant
Holder for 6x10 vials with 13mm diameter, tougher if printed from PETG. If you encounter issues printing without supports, try printing the version with supports.
Print approx. €2.81–€3.43 excl. taxPreliminary estimate for one variant
A 3ml vial labeling jig. updates: 2/17/26 - Alignment slider is still a little more loose than I'd like, and hash marks could use a little better definition. Updates should come pretty quick, plans from 10ml vial in the near future as…
The EDA (eye drop assist) consists of an eyepiece and pliers and allows easy positioning of the eye drop vial (single dose unit; EDO in german) in front of the eye. Long handles in an ergonomic shape allow for easy dosage of pressure on…
Microplate holder for 20 mm vials 2 x 4 grid Vial diameter: 27.0 mm Vial depth: 21 mm Height: 25.3 mm Depth: 127.7 mm Width: 85.5 mm Chamfer length: 5 mm Spacing between holes: 30 mm Spacing between long edge and hole: 14 mm Spacing…
The EDA (eye drop assist) consists of an eyepiece and pliers and allows easy positioning of the eye drop vial (single dose unit; EDO in german) in front of the eye. Long handles in an ergonomic shape allow for easy dosage of pressure on…
This rack was designed to fit inside of a small wooden box to hold and display vials that contain perfume samples. The rack measures 100mmx102mm, just under 4" square, and holds 16 of these small vials. The vials can be up to 12.5mm in…
Print approx. €3.11–€3.80 excl. taxPreliminary estimate for one variant
Designed to hold these glass bottles at the perfect angle to make an agar slant. Simply fill with 5ml of agar, loosen lids, place a few inside a jar and pressure cook for 10 minutes. Once pressure cooked let cool down to 120-130f then…
This allows for the rugged box to hold 3mL peptide vials or 10mL (22mm) vials.
A 3ml vial labeling jig. updates: 2/17/26 - Alignment slider is still a little more loose than I'd like, and hash marks could use a little better definition. Updates should come pretty quick, plans from 10ml vial in the near future as…
Microplate holder for 20 mm vials 2 x 4 grid Vial diameter: 27.0 mm Vial depth: 21 mm Height: 25.3 mm Depth: 127.7 mm Width: 85.5 mm Chamfer length: 5 mm Spacing between holes: 30 mm Spacing between long edge and hole: 14 mm Spacing…
I take the Eli Lilly Direct Zepbound with the 0.5 ml Vials And 1 ml Syringe. I have a tremor and I broke 2 needles and wasted a half-vial of juice (ouch, expensive). My daughter has no tremor but she uses it also. The vial snaps in…
Holder for 6x10 vials with 13mm diameter, tougher if printed from PETG. If you encounter issues printing without supports, try printing the version with supports.
Print approx. €2.81–€3.43 excl. taxPreliminary estimate for one variant
2 different sized inserts for different vial sizes. I removed the square extrusions in the lid, it prints a tiny bit faster and is easier to fit foam into if you want to do that. See original model for the bottom half of the case, I…
The design was developed to ensure a tight fit between the components. This isn't just an additional base for three or five stands—it's a connecting element designed to ensure stability during use. Therefore, this design isn't intended…
Build instructions as per the original Model. 2 x M3 x 20 mm screws are required.
Box with sliding lid to hold small glass insulin bottles (vials). Keeps bottles separate so they don’t clank together No supports, brim, or raft required.
This is a very handy configurable rack for creating an array of almost any size. The hole size, depth, number of rows/columns is all configurable. Print instructions No supports needed. Just use OpenSCAD to prepare the model, export as…
The stackable sample organizer is meant for PELCO® Vial and Cap, 30mm L x 12mm O.D., 2ml (TedPella 21449). It is designed for 10x10x.5 mm samples, and the samples are held so they cannot touch the sides of the transport tubes.
This is the first version of a print in place box with latching lid for the storage of vials and small bottles. I designed it to hold small bottles of essential oils. In the parameter dialog of Fusion 360 you can specify no of rows and…
This design is a modular base plate for glass vials. I use it to make sure some chemicals stay ordered when moving around and to organize them in a fridge. The plates have different numbers of slots and can be assembled together using the…
A 3D periodic table that arranges all 118 elements in a helical tube rather than a flat grid, with laser-cut element labels and vials for physically storing samples. Greatly inspired by this Instructable . Concept The layout matches a…
A 3D periodic table that arranges all 118 elements in a helical tube rather than a flat grid, with laser-cut element labels and vials for physically storing samples. Greatly inspired by this Instructable . Concept The layout matches a…
hello! This is a rugged box with an inserts to organize medicine vials like those used to hold compounded semaglutide, tirzepetide, retatrutide, peptides, K-beauty, TRT, Ozempic, Mounjaro, etc. It uses the Gridfinity system. It keeps your…
3x5x5 Gridfinity insert that holds twenty eight 10ml vials, or anything else cylindrical that is smaller than 25mm This is used in a 3x5x9 Gridfinity box to hold 28 10mml vials. It has holes for magnets on the bottom. You can use it in a…
A lightweight travel bottle/vial for any liquids. The set includes 95ml, 50ml, and 25ml variants. The cap with the collar allows the bottle to be sealed and prevents leaks. Print instructions: The bottle itself is supposed to be printed…
Important: Print horizontally or the columns will snap when inserting the vial! These are thin protective covers or cases designed for 5mL glass estradiol valerate injection vials manufactured by American Regent and Xiromed. They are…
There is a version with horizontal cutout (blue) and one with vertical cutout (red) for the vial. The clamp can be optionally mounted on both versions. From an ergonomic point of view the horizontal version is better suited for individual…
Designed to hold these glass bottles at the perfect angle to make an agar slant. Simply fill with 5ml of agar, loosen lids, place a few inside a jar and pressure cook for 10 minutes. Once pressure cooked let cool down to 120-130f then…
This will store 12 Insulin Pens, 5 3m pen cartridges and 2 3ml vials. These are common sized with Insulin and Peptides. The Pen slots will hold many different brands of pen. This is supplied free, and do not give permission to sell…
This allows for the rugged box to hold 3mL peptide vials or 10mL (22mm) vials.
I wanted a simple tray to hold the packets for my nasal rinse bottle packets and vials that I have to mix in with the solution. Here's a variation of my other nebulizer vial holder that fits my needs. My pharmacy changed and the vials I…
I made this simple tool for my mother, who needs to take eyedrops that are provided in “single dose vials”. The plastic of these vials can be rather stiff, and she has weak hands. Hence, a simple pincher, to increase the grip strength on…
Custom 24 position microplate for 8 mL vials (17 mm OD) with chamfered edges to aid in easier automated placement of vials into the block. Positions are labelled A-D, 1-6, with a marker on the top face pointing to position A1. Depending…
Custom 48 position microplate for 2 mL vials (12 mm OD) with chamfered edges to aid in easier automated placement of vials into the block. Positions are labelled A-F, 1-8, with a marker on the top face pointing to position A1. Depending…
Overview This TPU sample holder is designed for use in ultrasonic baths or laboratory sonicators, especially with glass vials. While styrofoam floats work well for plastic vials, they don’t grip glass securely and can cause samples to…
Box for 100 1.5ml tubes for lab freezers with dividers. Alternative to stupidly priced cardboard versions from scientific suppliers. Print lid upside down, no supports, no brims, use opaque plastic for light sensitive reagents. PETG…
Holds a row of vials and swabs for covid19 rapid tests in a row. This is parametric: update the "initial" variable at the top to add/remove vials in the row and to change what letter is in front of them. Category: Household
A Travel Case to hold Vials and Insulin Syringes. Holds five vials up to 16.5mm in diameter and 32mm in height Fits commonly used 3MM Vials Holds syringes up to 120mm in length Fits commonly used 100-unit insulin syringes Room for Alcohol…
This is a simple 1x2x4 units high Gridfinity bin that holds 8 fountain pen ink sample vials. This specific item works with ink sample vials up to 15mm in diameter and works with the specific vials I have been using. I cannot guarantee it…
Labs often capture honey bees and then need to introduce them to apparatus or transfer them. The plunger helps to gently introduce a bee into apparatus. This design is a simple modification to a snap cap vial. You will need to drill a…
Design Concept This storage box is specifically designed for securely holding vials of different volumes—3 ml, 10 ml, and 30 ml. The multi-layer drawer setup allows for easy segmentation and organization depending on vial size, making it…
A tiny 2x2 vial rack with 2.3cm diameter holes, designed to hold up to 4 vials, each with a 5cm height and 2.2cm diameter (cylindrical body). If using STL, make sure to repair geometry in the slicer before printing. More modeling details:…
This case is remixed from the SnapLock V2 parametric design available on MakerWorld. The internal layout has been modified to include six ribbed slots sized for 3 mL insulin or peptide vials, which reduce full surface contact with the…
Designed for the peptide enthusiast who needs organized, discreet fridge storage. This tray fits perfectly in the butter drawer of a standard refrigerator and holds a variety of common vial sizes — 3mL, 5mL, 10mL, and 30mL. Printed in two…
I take the Eli Lilly Direct Zepbound with the 0.5 ml Vials And 1 ml Syringe. I have a tremor and I broke 2 needles and wasted a half-vial of juice (ouch, expensive). My daughter has no tremor but she uses it also. The vial snaps in…
A stand for 12 vials, with a logo area (example in the photo). Basic organizer module (part 1 of 2). The stand can be attached to a vertical surface, furniture, or wall, using double-sided tape. //PL: Stojak na 12 fiolek, z miejscem na…
Made with 3ml tirzepatide vials in mind, they are 16mm in diameter, so i made the slots with 17mm. The screw lid made it extra secure and waterproof to some degree. Excelent to put in the fridge. If you want for storage, make it with 100%…
2 different sized inserts for different vial sizes. I removed the square extrusions in the lid, it prints a tiny bit faster and is easier to fit foam into if you want to do that. See original model for the bottom half of the case, I…
Modified one arm's arc for easier squeezing of single-use eye drop vials.
A small box to hold URENUS homeopathy bottles. Print in two pieces and hold together with a filament hinge. A color change at .6mm will let you highlight the text on the box cover. The .3mf will pause a layer 3 and is sliced for PLA.
The design was developed to ensure a tight fit between the components. This isn't just an additional base for three or five stands—it's a connecting element designed to ensure stability during use. Therefore, this design isn't intended…
I made this drawer organizer insert to fit a drawer in my lab. It has no bottom to allow clearance for 20 mL scintillation vials to sit inside and still let the drawer close as it is a narrow drawer. The model should be parametric in that…
This tray is designed for use in veterinary clinics, with a large and small storage space, as well as 10 dual function spaces that can hold 1mL vials or a tube/Vacutainer: Vial size range is Ø14mm–Ø17mm Tube size is Ø13mm nominal with…
FR (English text below) Boîte pour 6 flacons, fermeture à cran forcé et/ou magnétique Flacon jusqu'au diamètre de 32 mm et 88 mm de haut. Impression sans suport Pour la fermeture magnétique, deux aimants de 6 mm de diamètre et 4 mm…
This is a holder for 72 vials (12 x 6 pieces) for vials with a diameter of 13mm. The holes are 20mm deep. Dimensions are 202mm x 103mm x 22mm.
Building on the first model, I wanted to rethink the design to participate to the " last meters" contest. I started by trying to reduce the volume of the model. First by cut-out (yellow model) and by redesign with thinner walls (green…
The analysis of catalytic properties for heterogeneous catalysis requires many small-scale experiments. Catalyst activity is often rated by the turn-over. The turn-over is determined by gas chromatography (GC). For this purpose, the…
This was migrated from my Thingiverse profile and is from 2016. A more elegant solution to magnetic stirring multiple vials on a stirrer/hotplate than bunching them together using elastic bands. It goes without saying that this is for…
Holds vials, nozzles, and needle cartridges for the Derminator 2 device. Use the f3d file to change number of vials/needles parametrically.
Developed for my PhD work. Vial case to hold 12 samples vials. With the screw (red) secured in place, it becomes impossible for the push-fit tops to be removed. This model can be scaled to fit larger or smaller sets of sample vials.…
A box designed to hold twenty 28ml universal vials. Should print fairly rapidly with a 0.4mm nozzle. Wall thicknesses are all multiples of 0.4mm. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 Plus Rafts: No Supports:…
This version works best when mounting it to a flat surface (e.g. the inside of a kitchen cabinet) using double-sided tape.
You can get a 25x version here: https://www.printables.com/model/882970-holder-for-2-dram-vials-19-mm-25x For 1 dram vials, please check this design:…
For 4 dram vials, please check this design: https://www.printables.com/model/562787-4-dram-vial-holder-2x-4x-6x-10x For 2 dram vials, please check this design:…
Main box and stoppers need support while printing.
The lab where my wife works uses these FluidX tubes. The tool provided by the makers is an absolutely useless tiny piece of injection moulded plastic. If a cap was slightly tight for whatever reason, there was a good chance of breaking…
Case to hold seven vials and associated single use syringes. This is print in place. Each vial is approximately 20mm dia. x 39mm high. Syringes are BD 1ml TB. Printing No Supports Change History 2024-02-15: Provide space for 39mm tall…
This tray was designed to securely hold all reagent vials from a FLEX kit produced by Agilent in the refrigerator. Partitions are used to hold different reagent types in logical groups. There is space at the front to label the tray…
Vial racks for 4ml - 12ml vials. Each vial rack includes text on the side so that the users can avoid overheating the plastic racks. These should just fit on a 200mm wide bed. They hold 50 vials.
Inserts may be tight to install but I think thats preferable. Was able to press fit the smaller ones by hand but tapped the 5x5 and larger insert into place with a block and hammer. 5x5 and 10x5 have two inserts available, one solid and…
Printed in PETG on Bambu P1s fine. Next iteration would be to make the walls thicker or slightly more spaced to prevent the warping from the vial channels on the bottom.
I disigned this vials holder for a specific L&G ® gin kit but it can also used for example to vials holder in a chiemical laboratory or for inspire other designs. is divided in 2 part, the main holder and the cap. The cap fit good so in…
Vials Holder for 4 mL vials. The volder can be stacked of each other. Printe time a round 9 hours. (8 cm x 13 cm)
A colleague needed a little holder for their antibody containers, to avoid accidentally knocking them over during experiments. Custom made to fit these types of glass vials, with a diameter of 22mm. Single and double holder provided, as…
This remix is to include cutouts to hold standard peptide vials for safe storage. You will need (6) - 3mm x 30mm bolts. I prefer to use stainless dowel pins: https://www.amazon.com/gp/product/B07YKZJB6Z
We have a centrifuge at work with a fixed rotor that takes 50 mL Falcon tubes. We also have a microcentrifuge that takes the small Eppendorf tubes (1.5 mL or whatever they are). But nothing in between and sometimes people want to…
Small vials for crotchet finishing needles and other such small items. Prints best with a 0.1-0.13mm layer height on 0.4mm nozzles Use adaptive layers to minimize printing time. 2-3 walls, 1.0-1.6mm bottom layers. 15+% infill. Will print…
This is a holder for the nebulizer cup and a bunch of vials. Makes loading the cup easier. When I first starting using this thing I had a lot of trouble loading the cup as I have to remove it's top and then prop it up somewhere before…
An update to my previous rugged box remix, designed to hold an assortment of empty 3ml vials. I've included a bunch of designs ready to be printed as well as the files necessary to customize the box a bit further in Fusion 360 if what is…
Laboratory stand for 40mL vials (cca 27.4 mm diameter), for use in ultrasonic bath. Printed from PETG, 0.4 mm nozzle, 0.2 mm layer height, no supports. Print 1x top, 1x middle (top and middle are identical), 1x bottom and 12 feet.…
About Printable ampoules with luer-lock fitting (ISO 80369-1) for training purposes. Different variants available, according to their real-world counter-parts: Ampoules 1ml 2ml 3ml 4ml 5ml 10ml 20ml Vails 2ml 5ml 10ml 25ml Printed with…
this is sized to help make counting narcotics or other controlled 2ml vials easily. The numbering is raised and to make it black I just went over it with a black sharpie. Its held up for 2 years now of use.
One of the experiments involved growing anaerobic microorganisms in upside-down 100ml serum vials within a thermostat without shaking. These holders were designed with that in mind, and they fit WHEATON Serum Bottle 100 mL with crimp neck…
One of the experiments involved the cultivation of microorganisms in upside-down 200 ml serum vials inside of thermostat without shaking. These holders were designed for that purpose and as a scale-up for 100 ml holders:…
Tray for 30 glass vials (used in sample prep, etc.) for either GC or TOC application, that could be used for either 15 ml vials (such as ones used for GC headspace analysis) or for 30 ml and larger volumes (such as ones used in Shimadzu…
Holder for 13 vacutainer vials, easy print, no support needed
Used to work with IC equipment equipped with Dionex AS-AP autosampler. Preparing the full loadout of samples (3 trays) required some organizing and this is why this tray was designed. It has 3 sections (one per each vial block in…
Dimensions of my bacteriostatic water vials are 56mm lenght, 22,4mm width.
