Satsana 4010 Fan Duct for Geeetech Mizar S, Mizar Max and Mizar Pro (Compatible with Direct Drive)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made this specifically for the Mizar S (my printer), however it should be compatible with Pro and Max as well.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 45
- Makes
- 0
- Views
- 322
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
This is a re-work of my own re-work of the Satsana blower duct and hotend housing for the Mizar S. 1.6/1.7 bottom and 1.8 top ARE compatible with one-another. Compatible with Direct Drive bracket / original extruder and has clearance for the tensioner arm.
Features:
- Minimal extra hardware required (2x 20mm M4 bolts + nuts for the blower) - otherwise only requires original screws from stock components.
- Prints either as 1 whole part, or as 2 main pieces to allow for re-printing and modifying parts without having to re-print the entire thing or for doing the duct and shroud in different materials or colors.
- Duct (bottom part) can be printed standing-up support-less if you make the top and bottom separately. (I made mine with PETG, bridging was totally fine.)
- Supports 5015 radial blower fans for high throughput
- Comes with a printable guidepost that snaps onto 2 places to help you align the two halves before adhesion
- Good clean geometry makes for easy modifications
Note:
You will need to either bend, remove, or re-locate the LED on the bottom of the hotend circuit board for the duct to clear the light. I personally chose to desolder mine and re-locate it on the opposite side for minimal effort which allowed me to bend it a bit further so the duct fits.
