RAMPS 1.4 Box with Smart Adaptor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The original box was nice but didn't fit the Smart Adaptor and had a few glitches.
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 85
- Makes
- 2
- Views
- 470
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
The original box was nice but didn't fit the Smart Adaptor and had a few glitches.
Instructions
The box shrinked too much when printed in ABS so I scaled it slightly to be printed in ABS. I also noticed that a few of the connectors were too close to the edge for the rails to work on the left side. So this has a notch for those and now it locks in nicely. The Smart adaptor sticks off the right side so I made a notch to receive that. I also made a pass through hole for the Smart Adaptor cables on the top plate. I lenghten the box to make room for the Smart Adaptor. Now it will hold a fully loaded RAMPS 1.4 board minus the sd reader since that is on the Smart control panel which this box now handles.
Category: 3D Printer Parts