1 / 4
Broom Base repair for 24mm handle/stick
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sturdy repair for your floor broom. Designed for 24mm stick with tight fit. 45° angle.
- Rating
- 0 / 5
- Likes
- 39
- Downloads
- 143
- Makes
- 0
- Views
- 475
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial
This my simple design to fix your broom and to mount your broom stick better.
This is for 24mm stick!
It uses four screws for broom and one long for stick.
I designed it with 45° angle. It works best for me when cleaning garage floor.
Print settings:
- PETG or other tough material.
- 3-5 perimeters
- 20%infill Gyroid
- 0.3mm layers'
- No supports needed
If fit is too tight I recommend sanding wood down little.
If it is too loose you can put plastic tape around.
I think broom sticks are manufactured with huge tolerances :)
You can always print quick test and scale up or down if needed.
Remember to drill small holes to all woods before installing screws.