1 / 4
Brush Plating Pen/Handle/Wand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Universal handle for making your own Electroplating brushes.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 46
- Makes
- 0
- Views
- 575
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Handle for making your own Electroplating brushes.Commercial brushes are expensive, but rather easy to make yourself.
This design uses a standard 220 V joint sleeve to hold the cord and brush together in the handle (see pictures).
Shown model is printed in Devil Design Gray PETG.
>> If you like it, please leave a like, rating or a tip... :)
Print Settings
- 0.20mm layer height, 20% infill
- 2 perimeters, 3 top and 2 bottom layers
- No support or elephant foot compensation needed