Counting matching models…
Stable and waterproof OpenSCAD case V7.4 by pbtec See here a wonderful comment from a user: “This is INSANE! You sir deserve deserve the biggest applaud out there. This is a box to rule them all! … I have to admit I first didn't…
Try printing at 80% of speed and very hot bed (75° ?) Best R
Following a discussion I had with @ThatMakerKid, I wanted to create my own set of 3d printed spudger tools inspired by the iFixit spudger designs but with a geometry better suited for FDM printing. I decided to create 3 models to achieve…
Easy customizable OpenSCAD electronic project box V2.4 by pbtec You’ll need to download the free, opensource OpenSCAD software from https://openscad.org/ and install it. Once installed, open the ".scad" file in Openscad. Activate…
Features A magnetic connector for low-powered, removable electrical connections Fits two 6 x 2mm neodymium magnets (Edit: Added files for 6 x 3mm, 5 x 2mm and 5 x 3mm) Compact and easy to build into your models - roughly 10mm tall and…
Other desings similar to this were not perfect for me, so I designed my own version. It was created to be a fast print in vase mode so when u have a new component you can quickly print drawer for it. I use a 0.6mm nozzle and high layer…
ABOUT THE RIG The Rig is mostly printed DIY helper stand for testing electronic components in an easy and accessible way. This stand is built mostly from printed parts with DIN 35mm rails to provide easy and accessible testing. The rig…
A printable copy of the tweezers used by clockmakers or electronicians. Clip each “blade” in the support and it's ready. Print Settings : Printed on MK3S Filament tested : PLA Nozzle 0.4mm : 0.15mm tested
(The links below are affiliate links. I may earn a commission at no extra cost to you, helping keep my work free and continuously improving my designs.) This case is meant for this Electronic Load:…
This is a modular stand to hold the XSC G600 electronic microscope. I designed this because the original stand was terrible. Use 4 x m5 nuts and 4 x m5x30 bolts with hex head to assemble the stand. Important The arm-1.stl (orange x 2) and…
Prusa MINI/MINI+ ‘Z-TOP’ The Z-Top is an alternative lid design for the electronics box enclosure, which attaches seamlessly to your Prusa MINI or MINI+. The Z-Top connects at the base of the z-axis and replaces the lid of the stock…
Recommended layer height 0.15mm - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 09/05/2022 Electric dice REV1 d6 layout correction
Increased the size a little to mostly fill the MK3S+ bed(disabled skirt). I also added a small box on top to allow a filament swap when the main section is done to give it a more cpu look.
A wallet-sized stencil for quickly drawing electronic schematics. Includes resistor, capacitor, inductor, LED, switch, ground, voltage source and junction symbols. Perfect for students, engineers, makers and hobbyists
Just a remix to add some detail https://www.printables.com/model/117363-brain-electronic-circuit-wall-art/remixes I printed this with the Revo .25 nozzle in 3 and 4 colors. Print time took 4+ hrs no brim let it completely cool before…
Version 2.0 Dive into the future of DIY electronics with our Parametric Waterproof Electronics Box. This innovative design allows you to customize and modify the enclosure using Fusion 360, giving you full control over dimensions and…
This is a remix of Vasilas' resistor storage drawers. https://www.printables.com/model/25285-resistor-storage-drawers I've added a box that fits my needs better: Now there are stoppers, so the drawers don't fall out and I also added a…
prints best with 2 walls and 10% infill, suitable for 175mm TIG tungsten electrodes with hex sides, so it cant roll of the table :) when going with more strength, you might want to use the looser Version, since the threads get kinda…
A rear mounted electronics case for the Ender 3. At the back, there is room to mount a Raspberry Pi, fan, buck converter and two relays on the left. On the right, either the standard board with four TL smoothers or an MKS Gen L or SKR1.3.…
IMPORTANT : this model is about 20mm longer than the ender 3v2 print bed. So you will need to print this on a different machine or alter the model before printing. If you don't want to do that you can take a look at my original version…
Small mount for holding Knipex Super Knips pliers on the IKEA Skadis. Easy printing. Support recommended.
Handy Cheat Sheet for calculating Volts, Amperes, Watts and Ohms using just two variables. Fusion360 design added for you to improve upon. Please share your feedback and comments :-)
The model has the same dimensions as the one from Foppemoa , but you can use with this design the original filter. My air conditioner is an Electrolux Chill Flex Gold (EXP26U758CW). The cover fits probably many more models of Electrolux…
Safely pry into electronics for repairs and service. You're likely to damage these prints before you damage your devices, but of course exercise caution why prying into expensive things and always make sure they're turned off before you…
This box is designed for the following components: - SKR Mini E3 or stock Creality mainboard - Raspberry Pi 3B/3B+ - Stock Ender-3 Meanwell PSU - Stock LCD Screen Mounting: - The box mounts onto the PSU fan screw area. The PSU fan will…
Rear mounted Enclosure for the V-Minion compatible with the SKR2, SKR E3 MINI V3, SKR PICO. Using this enclosure will require the use of a custom Y endstop mount, which mounts on top of the extrusion rather than the side. SKR2 SKR E3 MINI…
You can insert and remove the Juice Booster 2 from the wall mount without any tools within seconds. So you can easily take your charging cable with you, to be able to load your electric car on public loading stations and as well use it as…
Available at: https://www.ebay.de/itm/318664437733 Update 2026/08/05: The model is NOT COMPATIBLE with AEG Electrolux AXP34 and EXP34. See below for a compatible mod. This mod enables you to turn the single hose AEG Chillflex (Pro) into a…
Easy box for electronic projects by pbtec There is a newer Version available. See https://www.printables.com/model/863273-easy-customizable-openscad-electronic-project-box Use Openscad customizer (Menu Window/unselect "hide customizer")…
The box is not 100% watertight but does have a pretty good seal with the stepped way the lid screws on. All you need is 4*m4 screws
Features A 3-pin version of my magnetic connector for low-powered, removable electrical connections Fits various sizes of magnets from 5 x 2mm up to 10 x 3mm Compact and easy to build into your models - the 6mm version is roughly 10mm…
I didn't find a travel box for the same kind of toothbrush that I have, so I made one. The brush snaps to the case by the neck and is easy to remove by hitting it to your hand. The top also snaps to the case. I neede these fast so had to…
Updated version can be found here: https://www.printables.com/model/201359-ender-3-v2-external-electronics-box-meanwell-psu-a Created electronics box for the MeanWell PSU and Ender 3 V2 motherboard so I could keep it outside of my…
OLD VERSION V2 Available on my profile Dive into the future of DIY electronics with our Parametric Waterproof Electronics Box. This innovative design allows you to customize and modify the enclosure using Fusion 360, giving you full…
This was my first attempt at a helmet. I made it for my daughters' Halloween costume, because I wasn't happy with the designs I could find (including paid designs) and we really wanted a working sight with blinky lights. I've included a…
This project takes an Atorch DL24 Electronic Load module and makes some minor modifications to it and encloses it into a custom 3D printed enclosure to provide improved handling and board protection. The project also converts the DL24…
VERSION 2 IS OUT NOW! CLICK HERE TO VIEW IT! Introducing Flippy! The all-in-one modular 3D printed electromechanical seven-segment display. Through the use of 14 electromagnets, each digit is able to quickly and mechanically display both…
NEW VERSION 4.0 This is a large modular electronics enclosure for 3D printers. It's big enough (depending on controller board size) to hold the controller board, a Raspberry Pi, and other electronics. It is not designed to hold the PSU.…
Build instructions You can either slice it yourself or used gcode that I uploaded. Have in mind that every printer is different hence has different optimal print settings. Printing labels I uploaded a DWG file with properly sized labels…
INTRODUCTION This is version 2 of the design backporting all the learnings from the release of EMS 300/350. The frustration of using VHB tape mounted to a printed piece emulating a DIN rail with yet another printed mount for each of the…
I have been looking for a electronics box that has the lid on the underside of the printer but I have not found one so I made one myself. I have include the cad files so you can make it your own if you want. Whats in the box? 1 Raspberry…
I needed a drawers for my electronics and small parts. I could have bought it but why If I can design and print it by myself? This design was born out of the need of something that I could keep on my desk, practical and easy to access…
Electronic box/enclosure fully customizable Updated V1.01 : Add vents Updated - V1.02 : Add invert option Footbox length update Vents update (logo) Use screw_holes.scad librarie https://www.thingiverse.com/thing:1731893 Updated - V1.03 :…
Attention! Print preparation is only available for STEP format model. STL model is for viewing only. Only when printing from STEP format can you achieve the stated characteristics! An organizer for mobile storage of radio components and…
Increased the size a little to mostly fill the MK3S+ bed(disabled skirt). I also added a small box on top to allow a filament swap when the main section is done to give it a more cpu look.
After trying various electronics enclosures for my Ender 3 Pro, I was not happy with many of them due to various issues with each Fit was tight and not very forgiving for running cables Airflow/cable management were usually afterthoughts…
The thinnest part of the opening pick is 0.3 mm. The spudger is 0.5 mm. Printing: Opening pick: 0.1mm layer height, 100% infill. For the other ones just default settings.
Various layouts to organize components and tools to keep everything close by so you can make repairs without leaving the table Print instructions Un pequeño taller para poder trabajar en el salón de tu casa sin quemar nada y teniendo…
a cool all in 1 desktop device organizer for airpods, iphone and smart watch. This also allows you to charge your devices while in the stand.
Atorch DL24 150W Electronic Load Case For the newer version that can be powered by a 5V USB-C power supply . The top cover can be installed without having to disassemble the heatsink with fan and re-paste the transistor - The top cover…
Ender 3 V2 enclosure If you plan to make this, I don't take any liability if you hurt yourself, working with on open power supply can be deadly. If you are uncomfortable with the PSU open, keep the lid on and install it and see if it can…
Based on the awesome work of Synyster1911 here: https://www.thingiverse.com/thing:4812842 UPDATED 03/09/2021: The "_v49" have the box lowered 2mm so that the covers are aligned with the extrusions, the rest is identical to the original…
These brackets can be used to hold two MeanWell UHP psus (usually one 24v and one 48v). Two versions are provided: one for UHP-200 models and one for UHP-350 models. I also included a modified version of the din rail mount which holds a…
This enclosure is designed to hold all the electronics for the printer. It holds the MeanWell power supply, controller board (4.2.7), front control panel, Raspberry PI 4 and a buck converter to power Raspberry PI. Included in the files is…
This is a dual hose conversion rear panel for the "Electrolux Chill Flex Pro EXP35U538CW" airconditioner. I implemented the same Electrolux connector made by wejn . It works great with his 150mm hose attachment .…
Images of printed part by me. Printed with eSun PLA+ orange filament. If this one breaks, I’ll print it from PETG for the added flexibility and longevity. I used normal cura supports for this, but I think tree supports also work.
This 2-tier electronic components storage box is the ideal solution for storing and organizing your electronic components in an efficient and convenient way. It is equipped with two separate compartments for storing your spare parts,…
Small project box with both M2 and M3 mounting holes for your ElectroCookie ½ Sized breadboard. Includes 2 x 11mm holes on the end to fit barrel plugs or grommets. Has a little extra space against the wall with the holes to accommodate…
This is the slim nozzle for Electrolux Ultrasilencer vacuum cleaner that uses special shape for accessories. Print instructions Print with brim as the object is tall with small print bed contact area.
Updated design! Made for my specific needs, but you can enjoy it as well. Click here for the previous version. NEW: Place for the BTT 24v UPS Detachable back door for the wireing Exhaust fan 2 on/off switches Holes for cable management…
The Braccio Robot arm from Arduino is a fun kit to get started in using robotics. But, it lacks any sort of control scheme. That, you're expected to come up with yourself. Well, I did that. You can use the included code to control the…
An OpenSCAD electronics enclosure designed to hold one rectangular PCB. The default settings are for the following: -PCB w/ 100mm x 40mm mounting hole spacing -SPAX #8 1 in. pan head screws for cover -M3-0.5 threaded heat set inserts for…
V2 (updated design) is available - https://www.printables.com/model/553387-ft-ems-voron-v02-v2-electronics-management-system INTRODUCTION The frustration of using VHB tape mounted to a printed piece emulating a DIN rail with yet another…
Simple holder for Wera electronic screwdrivers.
Basic parametric snap fit electronics enclosure / box. Printable without supports. You can size as you like using user parameters in Fusion 360. F3D file supplied. When exporting STL / STEP, it will already be orientated ready for…
This is a full model build of a Tron legacy disc desktop display including circuit python code to light it up. The Base was created to be printed on an MMU and I'll add a tutorial on how to create the whole piece shortly. I printed the…
Replacement knobs for a Nord Electro, Stage, and Piano keyboards. They should work on series 5 and 6 but I'm not sure about others. There are two types: nord-knob: Regular knob with no pointer. nord-knob-pointer: Knob with slot for…
I divided the Brain Electronic circuit wall art into 4 pieces so I could print it BIG in my 3d printer. I joined it and glued the “CPU” part on top of it to hide the joints.
⚡ Introducing the Millennium Machines Universal CNC Electronics Box The Universal CNC Electronics Box is designed to simplify, standardize, and streamline your CNC’s electronics setup—no matter which machine you’re running. Whether you’re…
Electronic Enclosure Master Template by Andreas Spiess: https://github.com/SensorsIot/Project-Box-Templates Great Idea To have a Paramteric Master for Project Boxes you can vary quickly! Thanks a lot! Youtube:
TD2.3 Electrobinoculars Production information Manufacturer Neuro-Saav Corporation Model TD2.3 Electrobinoculars Type Electrobinoculars Cost c. 100 credits Physical & Technical Specifications Length c. 0.25 meters Weight 0.7 kilograms…
Last changed : 18-07-2026 Simple model of the E-CVT used by Toyota and Ford in their vehicles, for example the Toyota Prius and Ford Maverick. This transmission uses a planetary gear set combined with electric motors to achieve an…
With this mod, there are several opportunities for mounting various fans up to 180x180, its made of 2 separate parts, that fit using M3 bolts/nuts. If you validate this mod, or have any suggestions or improvements, please let me know.…
rack suitable for network switches up to 8 ports
Part A: Countersink hole for M3x12-14mm Flat Head Screw Part B: Hole for M3 Heat-Set Insert
The fifth member of the Sinister Six, Electro. I have added custom supports to the Shins, Forearm and Belt that are easily removed. Everything else will print fine without supports. This design is meant to replace most of the Mini 13…
Instructions are in the PDF document and in the YouTube video Printing the branches The snowflake consists of SIX branches. A branch is contained in the Snowflake.stl STL model and in the Snowflake.3mf 3MF file. Print SIX copies of the…
Albi Magic reading Electronic pencil. This is a binder for different sizes of books and old and new pencils.
I design a Electronic Bay Cover with LED Light Just a little favour >>>Less then 10% of downloaded Models get a like. → If you like the design, it will be nice if you click on the like button and maybe share your print. Its a heavy…
Remix of the fantastic design by matman_m: https://www.thingiverse.com/thing:3505890 -> created various versions from 2 to 6 brushes -> starting with the 3-brush-version, there are also dual-charge versions Available as .STL and .3MF…
Inner and outer knobs for TC Electronic G-Major 1 and Triple-C devices. Possibly to fit other devices from TC. Inner knob has clearance versions. Every 3D printer has different possibility about precision, so I created clearance files…
This is a small 50mm by 50mm box, that can be mounted to the wall. I used it to house some WAGO connectors. Print instructions Category: Organization Summary This is a small 50mm by 50mm box, that can be mounted to the wall. I used it to…
A base for the Infinity Cube Lamp (i used the Snap-fit Infinity Cube Light (No Glue) von DieselRabbit) and WEMOS D1 mini. I implemented a 5V connector because my lamp has 156 LED, which needs approx. 50W for full brightness . Which equals…
Sometimes it is a bit hard to place the black cover on the bottom of the printer. With these brackets, you have an easy way to slip the cover at the right position. Even with the CNC kit mounted. Here is an example how to use it: You just…
I really liked the stackable electronics mini - rack but it wasn't tall enough to fit the mini PCs I needed to put on it. This is a remix that is 25mm taller. It is the same length and width so you can stack the originals and this taller…
Description Replacement for battery cover for Soviet electronic games (Электроника ИМ - clone of Nintendo Game & Watch ). Can be used for all game device, e.g. : NU, POGODI! / НУ, ПОГОДИ! TAJNY OKEANA / ТАЙНЫ ОКЕАНА VESJOLYJ POVAR /…
This drum mount is sized for any Alesis brand electronic drumset. its made to clamp a 38mm tube on the big clamp and a 19mm tube on the small one. It is printed in two parts and epoxied together so that each clamp can have the optimal…
i did insert magnets in the cpu block and the holes around to hold objects on the wall (experimental feature ;-) inserting was done via negative modifier in the size of the magnet(s) plus 5% a colour change pause was inserted on layer 9…
This project uses IR sensors to detect when a ball is near then triggers a relay switch to the external power source letting current through the wire which pulls the ball away from the sensor and to the next magnet. No programming at all.
NOTE Updated V2 of the frame for the Voron 2.4 has been released. Please use that as it has a number of improvements. https://www.printables.com/model/816080-ft-ems-v24-350-v2 The cable ducts that were designed for EMS 300 have now been…
3D print your own Transmission Electron Microscope (TEM) ! This model is designed for FDM printing, but probably works okay on SLA printers with some smart placement on the buildplate. ✨ Features : The microscope column opens up to reveal…
This is a simple holder for the ProFlight 2 to fit over the headset clip in the Airbus A320 series. Print upright (with the cable cutout on the build plate) and supports on the build plate only. 15% infill works fine.
This simple rotating device was made from scrap lying around and serves for slow rotation of the electroplated models. Read more about electroplating and using the device in a dedicated article. I suggest using the Rotajig by XenoArch as…
Materials 4x M3x3 heat set inserts (short) 4x M3x10 socket head screws Print the LED light guide with transparent PETG. You can find a nice guide here: https://www.printables.com/model/15310-how-to-print-glass Preparation Put M3 heat set…
INTRODUCTION This frame was designed to help manage the electronic components required for a switchwire conversion (SKR Mini E3, Creality boardes, Raspberry Pi, U2C boards etc,..). Typical conversions have you squish all these components…
Yashica Electro 35 Battery Adapter /Yashica MG-1 (etc etc) After a sucess of previous model (first upload on 5th december 2019), I decide to improve the model by reinforced the adpater. If you have an old camera that uses mercury cell…
Two mounts for the MDT LRA SEND iT - MV3 level. both are vertical mounts for the SPUHR mono block scope rings. The 45 degree mount is to have the SEND iT on the RIGHT side of the gun. This is the best location for lefties and/or left eye…
ACTUALIZACIÓN 3-4-2024: Añado un soporte extra para accesorios (leds, pinzas, etc) donde se pueden roscar dos tornillos de sujección. Hay que usar dos insertos para 3 mm. He diseñado un sencillo soporte ajustable en altura para mi antiguo…
I needed a box for a three AAA batteries for my electronics project. Couldn't find it so I made it myself. Enjoy.
