Infinity Cube Light Flat Electronic Base
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A base for the Infinity Cube Lamp (i used the Snap-fit Infinity Cube Light (No Glue) von DieselRabbit) and WEMOS D1 mini
- Rating
- 5 / 5
- Likes
- 259
- Downloads
- 425
- Makes
- 5
- Views
- 3,953
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A base for the Infinity Cube Lamp (i used the Snap-fit Infinity Cube Light (No Glue)
von DieselRabbit) and WEMOS D1 mini.
I implemented a 5V connector because my lamp has 156 LED, which needs approx. 50W for full brightness. Which equals in 10A. The max. power output of the controller is 850mW/1W.
For full brightness you have to adjust the maximum current value in the wled interface.
The controller is a Wemos D1 mini, which you can place onto the Bottom Part of the base.
The base is screwed together with 3 M3x16 screws. Inside of the box there are M3 heated inserts.
I also added the .f3d file if you want to change something. Or write a comment i can remix it :)