1 / 1
MicroSD + Adapter Case Inserts
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Little inserts for using those microSD+Adapter cases
- Rating
- 5 / 5
- Likes
- 41
- Downloads
- 112
- Makes
- 2
- Views
- 838
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Public Domain
I had a TON of these little plastic cases for holding the microSD cards with the full size SD card adapter. To consolidate these cases I designed some inserts for them.
- SD card holder: Holds 2 microSD cards in the spot for the SD card adapter (i.e. the holder is just the size of an SD card)
- Full case holder: Holds 6 microSD cards filling the whole case. This requires removing all the little posts within the case.
To remove the posts, I believe some flush cutters should work, however I used a little chisel like this (even besides this project, this is one of my most used tools, highly recommend).
I didn't glue anything in, but you could.
Originally printed in PLA, 0.2mm height. Brim shouldn't be needed but I did use mouse ears on the full case holder.