1 / 6
Interchangable Clip-On Toolholder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Organize your tools no matter where you work. This clip can be modified to your liking and easily attached to any table.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 19
- Makes
- 0
- Views
- 634
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
Introduction
Do you hate clutter in your workspace? With this clip, you can simply pin your tools to the edge of your table. The work holder is attached using 6 mm diameter magnets. This can be customized according to your requirements.
The height of the table plate should be 18 to 25 mm.
Files
| Name | Description |
| Main_Clip.step | Main Clip which holds the inserted tool holder |
| Tool_Holder_Modify.step | Modify this very basic file to your needs |
| Tool_Holder_ScrewDriver_7mm.step | Pre-Made screw driver holder |
What you need
- Round magnets ⌀ 6 x 3 mm
- PETG
Printing parameters
- Infill: 20 %
- Layer Height: 0.2 mm
- Nozzle Diameter: 0.4 mm
Installation
- Press in the magnets. There are two holes but most of the time one is enough.
- Ensure that the polarity of the magnets is correct and that they attract each other.
I hope you enjoy this model !