Bed Scraper
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printable Bed Scraper with easily replaceable blades that have rounded edges to protect bed from damage.
- Rating
- 4.939 / 5
- Likes
- 174
- Downloads
- 1,496
- Makes
- 38
- Views
- 3,713
- Reviews
- 33
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I was looking for a Bed Scraper with rounded corners on the blade, so that the print bed and parts are less likely to be damaged. I was surprised to find no models available, so I made my own. Everything was modelled in Fusion360.
This version also has easily replaceable and double sided blades that have been optimised to use minimal material. They simply pull out and can be reversed or swapped , a new one can then be pushed back into place. I would recommend pushing down onto a hard surface to protect your fingers.
Handle | Blade |
|
|
Nozzle: 0.4mm | Nozzle: 0.4mm |
Layer Height: 0.20mm | Layer Height: 0.20mm |
Infill: 25% | Infill: 25% |
Notes: No Support or Brim Required | Notes: No Support or Brim Required. |
|
|
Material: PLA | Material: PLA |
Weight: 11g | Weight: 1.7g |
I hope you find this model useful. If so we would love it, if you can give us a LIKE. |