1 / 13
STC 1000 case enclosure
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Additional Items 2x Extension leads 3x M16 Cable Glands (see below) 8x M4x6mm screws (optional) 8x M4x6mm nuts…
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 105
- Makes
- 1
- Views
- 634
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Additional Items
2x Extension leads
3x M16 Cable Glands (see below)
8x M4x6mm screws (optional)
8x M4x6mm nuts (optional)
https://www.ebay.com.au/itm/262679718072
The model can be edited at the link above. As the end plates are interchangeable, please feel free to modify and I'll add any relevant endplate models to the Thing
Print Settings
Printer:
Smoothieware CR10
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2mm
Infill:
20%
Notes:
The model can be edited at the link above. As the end plates are interchangeable, please feel free to modify and I'll add any relevant endplate models to the Thing. Prints well in both PLA and PETG
Category: Electronics