1 / 5
LED BOX - Illuminated Display Base
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
WLED controlled display base. Includes an optional crane/hook to hang stuff on top of the lights.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 38
- Makes
- 0
- Views
- 304
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Jellyfish model used in the pictures created by Toxværd
- ESP8266 Node MCU v3
- 6mm square button
- Individually adressable LED strip ~+ 30cm
- 4 M3 brass inserts
- 4 M3 screws (max 12mm length)
- 4 M2.5 brass inserts
- 4 M2.5 screws
warning : print orientation not set in the files, always print face down, no supports required
- Main & Diffuser : Print as one if you have an MMU / AMS
- Bottom
- Cache
- Crane (optional)
- Button cap
I printed everything on a Bambulab X1C with 4 walls & 15% infill.
Filaments used are : PLA Galaxy Nebulae & PLA Basic White from Bambulab
- Heat inserts 4x M2.5 on the bottom standoffs & 4xM3 in the main holes
- Solder the Led strip & button to the ESP8266
- Attach the led strip around the rim
- Use the cache in between the led strip & the bottom
- Put the button into the specified grove & glue the button cap on the other side
- Optional : Attach the crane to both part
Any problems with assembly? Don't hesitate to reach out and I will try my best to help you and improve this guide :-)