1 / 4
BTT SFS v2.0 Mount Adapter for Neptune 4 Series
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple adapter for the BTT SFS v2.0 that leverages the Neptune 4 series' existing filament sensor mount.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 72
- Makes
- 0
- Views
- 655
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This simple adapter that leverages the existing filament sensor mount on the Neptune 4 series to mount the BIGTREETECH Smart Filament Sensor v2.0.
Try this out with my Bowden adapter for OrzOrzOrz's Neptune 4 shroud with KUSBA spacing
Bill of Materials
- Neptune 4 Series Filament Mount
- BTT SFS v2.0
- 3x - M3x6mm Socket Head Bolts (included with BTT SFS v2.0)
- 1x - M3 Long Threaded Insert (4.6mm diameter x 5.7mm length)
- 1x - M3x16mm Socket/Button Head Bolt
Note: You can probably use a short M3 threaded insert if required
Print Settings
- 4 Perimeters/walls
- 100% infill
- 0.2mm layer height
- 0.4mm line width
- 5 top and bottom layers
- Parts are pre oriented in the correct position for printing
- No supports required
Installation
- Remove the screw from the back of the Elegoo filament sensor (leaving the pivot mount attached to the filament holder)
- Install threaded insert into center hole on adapter (either side of the adapter should be okay)
- Attach adapter to BTT SFS v2.0 using the included M3x6 bolts
- Use M3x16 bolt to attach the adapter to the existing sensor's pivot mount