Counting matching models…
There are two models in the download, one with cutout and one without. This cutout is made for the clearance of the nut for the Z-axis pom wheel. I have made this for the EZR Extruder, for straight filament paths. Print it on the side…
Remixed the extruder mount to fit without the print head casing.
BigTreeTech SFS V2.0 Voron extended mount by 20 and 23mm lower The encoder puts a lot of resistance to the filament pull, and the extra loop on the bowden cable made the friction worse, and we don't like that. Here is a solution where…
Simple mount for your micron 180 to use a btt sfs v2.0
nothing complicated. Basically, just a fusion of 2 models on here. you'll need the following files : Download the file here. The filter holder (HEPA Filter.stl) from https://www.printables.com/model/381011-voron-24-hepa-filter The sensor…
This mounts in place of the coupler mount on the top of the SV08 Max to utilize the BTT Filament Smart Sensor V2 SFS.
for filament sfsv2.0 for ender3 or direct drive extruder Printed on Orcaslicer Layer height 0.28mm Normal support Perimeter loops 4 Fill pattern: Lightning infill Infill density 10%
The models have been redesigned for compatibility with the latest K1 revisions in theory, as I haven’t printed them yet. I will provide an update once they have been printed and tested. Additionally, the SFS corner model has been updated…
SV08 MAX BTT SFSv2 MOUNT EDIT: ADDED 90º version where its angled to the side of the printer. This model is designed to fit the official Sovol Enclosure kit! No modifications required. Just add it to the open slot in the top metal plate.…
Mounts a BTT SFS 2.0 on a vertical (or horizontal) 2020 rail, and still allows panel removal. The sensor feeds filament perpendicular to the mounting rail
Bracket for attaching the BigTreeTech Smart Filament Sensor to a vertically mounted extrusion motor, such as what's found on the Ender 3 line of printers. This works best when the extruder has a flat surface to mount against - in my case…
SV08 / Voron 2.4 Exhaust Filter that accepts the BTT SFS v2 filament sensor. This is ONLY the filter housing/shell. You still need to print the other components from Nadir. I might look at a modified version with a 9025 fan mount for the…
Filament spools have labels. I like seeing those labels, so I moved the entire filament sensor to the other side of the printer. This actually makes the sensor much less accurate, since it moves when you print anything. I ended up getting…
This is a quick and easy mount to use the BTT SFS 2.0 with the "RatRig V-Minion Smart Filament Sensor Top Cap". Made in Tinkercad. Both files are included, but if you already have the TopCap printed then you'll only need the mount I'd…
Printed in ABS+ with Voron PiF settings.
13 July 2024 - Rev_1 Updated files with adjusted dimensions and increased fillet radius. I made this beefier bracket to mount BTT smart filament sensor V2.0 to my Micron+ back panel, since I have 3mm foam panel I need a specific one and…
I wanted to attach my BTT Smart Filament Sensor to my Bastion printer, but both items have threaded holes for attaching to other objects. So another adapter plate to the rescue. The sensor attaches to the plate using m3x6 BHCS (3). The…
There are two models in the download, one with cutout and one without. This cutout is made for the clearance of the nut for the Z-axis pom wheel. I have made this for the EZR Extruder, for straight filament paths. Print it on the side…
Remixed the extruder mount to fit without the print head casing.
Adjusted the tolerances of the mounting holes so that the device won't migrate when mounted. Recommend using with two M3x6 bolts. Drill or poke through the holes.
Prints flat, no supports needed, material and settings shouldn't really matter. I used eSun ABS+. This mount attaches to the stock spool holder just like the original, and allows you to replace the stock runout sensor with a BigTreeTech…
Mounting bracket to replace the bowden retainer with the BigTreeTech Smart Filament Sensor v2.0 Sensor attached to mounting bracket with screws included with the sensor and bracket attached to profile with 1 t-nut and 1 M3x8 SHCS. Version…
Creality K1/K1C honeycomb style side mounts SFS v2
Disclaimer: This model has only been tested on a V-Core 4 500 Hybrid. This has not been tested on an IDEX setup and may not clear a dual head setup. This has not been tested on a 300 or 400 sized machine. After I convert to IDEX I will…
It's pretty self explainatory really, needs supports.
BigTreeTech SFS V2.0 Voron extended mount by 20 and 23mm lower The encoder puts a lot of resistance to the filament pull, and the extra loop on the bowden cable made the friction worse, and we don't like that. Here is a solution where…
Remix of Modified Voron Exhaust Filter by Michal Kelnar to add a option for PG7 *New to CAD but did my best* tried to line up the fitting best I could to keep in aesthetically pleasing from both sides so there is a slight offset.
###################NOTICE################## this is a work in progress, changes and variety is in the works. ########################################### Printing Instructions: Infill: 15% or Higher. Filament Type: PLA/PETG/ABS/ASA (i.e…
Inspired by MapleLeafMaker's BTT-SFS2 Mount , but building on the original Trident midspan panel clip (6mm version), this model provides a way to mount the BigTreeTech SFS2 (Smart Filament Sensor v2) in a way that is convenient for…
BOM: connector 2x - PH2.0 1x - smd 0201 100R resistor screw 4x - M3x6 The kit includes XH2.54 connectors, you need to change them to ph2.0, Crimping Tools is required. Installation of a resistor 100ohms, there are 2 options for further…
Mount for the BTT SFS V2.0 Smart Filament Sensor, i use it for a Voron 0 and a Micron One version is for top mount (micron), the other i used on the voron0 https://biqu.equipment/products/btt-sfs-v2-0-smart-filament-sensor
im used to tinkercad, but thats not good enough for this project. So its taking me time to get used to this one. only started yesterday. xD dont know how the rest will go. but i have thrustmaster airbus, but the addons are quite…
Btt Smart Filament Sensor V2 Quick clip mount. I use these for almost everything. Mostly do to hating hammerhead nuts. These are for a 6mm gap (3mm acrylic panel and 3mm foam tape). I do not use any of the 1mm foam tape. Each quick mount…
The left plug fits all Neptune 4 modifications, while the right one is only for the Neptune 4 Pro.
Recently had a couple of failures when printing due to filament getting stuck entering the extruder. When I checked, the filament had a kink that was causing it to get stuck. I don't know if it was already in the filament, or if it kinked…
This is a simple 2020 mount for the BTT SFS-V2. I had come across several, but stopped after #4-5, as they were all mounting the sensor in an orientation that wasn't working for me. I wanted my sensor mounted vertically as to allow the…
Recommend drilling the smallest diameter with a Ø2mm drill. This may work for other filament sensors, this is however untested. For reference it is a M6x1 thread, 4.6mm long.
Mount your BTT Smart Filament Sensor (SFS) on your Micron twist lock corner clip! Print following usual Voron print settings
Made this mount for the BTT Smart Filament Sensor 2.0 to fit inbetween the filament holder and the PTFE bracket (or anywhere else on a 3030 extrusion)
Disclaimer: Before you start doing anything with electrics, make sure that you understand what you are doing and comply with all conditions for your safety, the safety of others, as well as the safety of equipment.…
Built for a modified Creality Ender 5 Plus with Biqu H2 V2S Extruder to integrate with a BTT SFS2.0 smart filament sensor. Printed in ABS-CF for stiffness/temp resistance (running in a heated chamber). Some holes may need to be tapped M3…
I always missed a filament runout sensor on the SV06. Luckily the motherboard comes already with the needed ports. I simply removed the cable which extends the toolhead PCB runout port and connected the new sensor directly to the…
The CR-10 V3 sensor bracket is, to say the least, useless because the angle it makes with the spool and the extruder is generating a lot of friction. I already solved the problem with a previous model to relocate the stock sensor . This…
Modified mount by Christerb (which was a remix of https://www.printables.com/model/672137-btt-sfs-v20-for-sovol-sv07sv07). This mount has the sensor mounted on hinge so it can be swung back so the extruder can be cleared easier in case of…
This is a relatively simple autopilot box based on the Kodiak 100. It uses an Arduino Mega for Mobiflight connectivity. More information, and all project and control files, are hosted on GitHub:…
bigtreetech smart filament sensor v2.0 bracket for creality k1 max only Two M3 OD= 5mm insert needed no support
Adapter for the Bigtreetech SFS V2.0 filament runout sensor to the extruder mounting holes on the Anycubic Vyper. I recommend printing with adaptive layer height with 15% infill and 3 perimeters. Use 4 mm. M3 heat set inserts for screwing…
Buttonbox comprenant 8 switchs à levier pour le panneau des lights, 6 boutons tactiles pour les fuel pumps, les batteries, ext power, APU bleed,le master switch APU et le Start APU, un rotary 3 positions pour les ADIRS (les 3 sont couplés…
You'll need five m3 x 8 screews
A simple mount I designed to mount the BTT SFS 2. Originally I designed it for my Ender 3 but I decided to make it universal. It will work on any 4040 extrusion, if it can slide on from an end. It uses the bolts that come with the BTT SFS…
Thanks to Chado for uploading the step file and SapuSeven for the original model. I needed more space for thicker panels (4mm panels with 3mm foam), so I added a fourth hole to allow the mount to be used in both directions.
I'm sure you could design something better, but anyway it works. Bottom Bowden fitting may not be necessary.
Printed in PETG Model DOES NOT FIT K1MAX Hardware needed ------------------- 2x M3x10 mm machine screws (If they are still there I believe there are two extra that come with the printer) Sensor Setup ----------------------------------…
This is a model to mount your Bigtreetech SFS v2.0 to the stock extruder of the FLSUN Q5. It requires the printer to be opened up and the extruder to be completely unscrewed as this gets placed between the extruder and the motor. you may…
Der originale Tube-Mount des Voron wurde im Voron Design neu konstruiert, um an selbiger Stelle den Filamentsensor von BigTreeTech SFSv2.0 montieren zu können. Druckbar ohne Support, passgenau in gewohnter Voron Qualität. Montierbar mit…
A vertical mount for the BTT SFS 2.0 that is designed to fit 1515 framed printers using 3mm thick foam with their panels I adjusted the amazing mount by Chado to fit 1515 printers and fit over panels. It does require the use of M3x6 BHCS…
A mount for the SFS 2.0 Filament sensor including Tee nuts for mounting to 2020 Needed: Included screws 2x 3mm self tapper 12mm
This will allow you to hard-mount your BTT Smart Filament Sensor without a bowden tube coupled on both the SFS and your extruder and works on most bowden tube printers with 2020 rails. This is particularly useful if your extruder doesn't…
This mount replaces the stock spool holder. The factory M3x6 screws can be used for the mount. The BTT needs some M3x10 screws. The screws in BTT kit are too short. Sensor is aligned with the hole in top of printer to feed filament from…
This mounts the BigTreeTech Smart Filament Sensor V2 with clearances that allow for feeding it straight into the side Bowden entry on the Nevermore Stealthmax V2.
Changed connector on the meganever2 BTT SFS mount to SilencedFrost UBBI connector. The mesh looks bad, because I had to remesh it, but it's printable and it works perfectly. Print - Related Settings →…
The CR-10 V3 sensor bracket is, to say the least, useless because the angle it makes with the spool and the extruder is generating a lot of friction. I already solved the problem with a previous model to relocate the stock sensor . This…
Just simple model to mount Big Tree Tech Smart Filament Sensor v2 on LEOTE - CREALITY K1 MAX - LID RISER V3 . EDIT 29/04/2025: adjusted dimensions, corrected holes positionions, added sligth counterbore uploaded STEP file
This is just a quick easy model to help hold the end of the bowden tube. After changing to a toolhead sensor, and trying it out with a floppy hose in place of the old sensor, i decided to do this. I was going to cut some holes in it and…
BOM: 3x DIN 912 - M3x8mm screws for mounting the sensor 1x DIN 912 - M3x16mm screw + M3 drop in T-nut 3030 for mounting the sensor to the frame
Simple mount for your micron 180 to use a btt sfs v2.0
Part can be mirrored for when you have a spool on the left side of the printer. I made a versions for 3, 4 and 5mm panels.
Держатель катушки с датчиком SFS. Оригинальный держатель(трубка) катушки подходит. Оригинальные винты наверно будут коротковаты,использовал точно такие же,но чуть длиннее. Нижнее отверстие у меня почему то не подошло по модели K1,может в…
This is a corner panel remix for mounting the Bigtreetech's Smart Filament Sensor 2.0 (BTT SFS 2.0) to the Voron 2.4 or Trident canopy. The sensor is mounted at an angle and there is a pass through port for the PTFE tube, as well as a…
Allows the mounting of the BTT SFS V2 filament sensor on the left side of the Qidi X-Smart 3 along with the Mellow Fly UTOR (RS232 board) giving 2xRS232 outputs (For V3 toolboards) and 2xUSB ports. You will need slightly longer screws.
I try to reduce the sharp turns in the (reverse) bowden to minimize drag. To that end, I use these guides to allow for a smooth path while using the BTT SFS2, mounted with the nice…
I remixed my own design, as i do not need a Dome light switch (reason can be found here ), but inserted a Wing lights switch.
This is a bracket that offsets the BTT Smart Filament Runout / Motion Sensor v2.0 for optimal use on the Qidi X-Max 3. This bracket uses the stock mounting hardware and location to replace the stock runout sensor with the BTT SFS v2.0.…
This holder allows the filament sensor to move and thus ensures significantly less friction and resistance I recommend using the Voron parts print settings. Set the layer to 0.2 and the infill to 40%. BOM 1x BTT SFS V2.0 1x GE5C Radial…
Mount for my filament sensor and additional parts to setup a passthrough of a ½" plywood hole. Part of https://www.printables.com/model/1263333-3d-printer-enclosure-parts
New version uploaded with more space for cable and connector Check out the original creator’s model for more info and the source design.
I made this to mount the BTT SFS 2.0 sensor on the outside of my Voron 2.4. For the mount there is a M3 or a M5 version to choose from. Check out my other parts for canopy bowden passthrough also:…
Made this to mount the filament sensor in front of filterbox. Uses 2x original sensor bolts and 2x M3x8 + T-nuts. PTFE inlet line up with filterbox hole.
I made this to mount a BTT Bigtree Tech SFS V2 Smart Filament Sensor onto my Voron Trident printer. It should work with many other types of printers too, if they are based on the common aluminium extrusion many printers are made with. The…
Mounting bracket for sovol zero for installing BTT smart sensor. Boom: 2x M3x8 hexagon socket countersunk screw (for mounting the btt)
Wanted to mount the new BTT SFS 2.0 up front so I could easily get to it for making adjustments and loading filament. I thickened the areas of the original model near the mounting bracket to accommodate the extra weight and made sure to…
Big thanks to schreider for the fantastic inspiration and detailed guide on connecting and configuring a motion sensor for the QIDI Q1 Pro ( https://www.printables.com/model/1147564-qidi-q1-pro-connect-and-configure-any-motion-senso )!…
Уменьшается поле по Y. Ремень не достает. printer.cfg: [stepper_y] position_min: -2 position_max: 291 [prtouch_v2] clr_noz_start_x: 130 clr_noz_start_y: 288 (наверное можно 291,не пробовал) Инструкция:…
A simple mounting plate for mounting the BTT Smart Filament Sensor to the extruder bracket of the Ender 3 models that have been converted to a direct drive extruder. Hardware needed: 3x M3x12 Machine Screws 2x M3x8 Machine Screws…
Print ASA/ABS/PETG 20-30% infill (or 40% if you want to use Voron spec), no supports required. For use instead of the Sovol auto feeder unit. Use 2x 8-10mm M3 bolts to attach to the printer & x3 10-12mm M3 counter sink bolts for the…
I modified my Ender 6 to direct drive, and when adding an SFS v2 I wasn't happy with the positioning. It was too close to the case, and my TPU prints would frequently pull the filament off the spool, resulting in tangles. This mount…
Mountable 4 pin JST connector, added room in bottom for wiring, bottom lid for access
I wanted to mount the BTT SFS V2 to the toolhead and connect the sensor via EBB42 in part of filament run out and potentially use for a filament sensor for a future Box Turtle addition rater than adding a detection with within the…
I made a little filament guide ("reverse bowden") system for my SV06. This bracket hold the BTT SFS v2.0 Smart Filament sensor where the spool holder goes originally. I removed it to print directly from dryer. It uses the supplied…
nothing complicated. Basically, just a fusion of 2 models on here. you'll need the following files : Download the file here. The filter holder (HEPA Filter.stl) from https://www.printables.com/model/381011-voron-24-hepa-filter The sensor…
string: added douple mounting holes for btt sfs 2.0 redesigned for more firmly assembly corner: redesigned for more firmly assambly, smaller holes for fixing with self-tapping screw
I found the original model that provides a pivot mount for attaching the BigTreeTech Smart Filament Sensor (SFS) V2.0 to an aluminum extrusion, and wanted to adapt it to my needs of using it with the Creality Ender 3 V3 SE. Since I…
![BTT Smart Filament Sensor [SFS] V2.0 3030 extrusion mount](https://media.printables.com/media/prints/ba2b7812-e38a-406a-a828-682cd3125ba3/images/9528826_35194581-b034-467a-a288-9cd2923bb81e_0683de6a-84f2-474f-b184-687fba8c39b5/signal-2025-04-18-123835_002.jpeg)
