1 / 4
EyeSite
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Save your eyes from screen fatigue following the 20/20/20 rule.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 197
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
EyeSite
- Save your eyes from screen fatigue following the “20/20/20 rule.”
- LED that turns on after 20 mins, press a button, it flashes for 20 seconds (time you should be looking away to 20 ft distance) then turns off (back to work).
- Sits on your laptop screen.
- Satisfying click, fun to fidget with.
Print Settings
- Layer height = 0.2 mm
- Walls = 2
- Infill = 10%
- Support = yes for front case
Assembly / Installation
You will need:
- Arduino Nano
- LED pushbutton: https://www.amazon.com/gp/product/B01N2T2LJI/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
- 2 small M2 or similar screws.
Assembly:
Wiring
16mm baomin push button (latching type)
+ to PIN 13 (for LED voltage)
- to GND
C to D7
NO to GND
NC is unconnected