1 / 1
Cable guide/cap for Fysetc CNC bed frame (Voron 0)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If you are not using a cable chain in your Voron 0 build and you have a Fysetc CNC bed mount, this is for you.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 23
- Makes
- 0
- Views
- 413
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
A solution for a very specific situation; I have a Fysetc CNC'd bed mount frame and will not be using a cable chain for my bed wires. This cap is designed to perfectly fit and mount to the side of the bed frame so the wires from under the bed can be routed out and up. The inside of the cap has a slot for a small zip-tie so you can fasten the cable bundle to the cap.
Print with 0.2mm layer height in a filament of your choice (ASA/ABS recommended). M3 screw length: about 12mm to max 20mm.