Parametric Wire Spool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This parameterized spool is designed (but not required) to have its sides printed as open infill. Default is 70*20mm.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 113
- Makes
- 0
- Views
- 495
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
For the default size, (20mm width, 70mm OD) just print the two halves, and glue them together (I used CA glue) with the aid of the locating indentation on one half. Both halves are included in the model file. Alternatively, if you desire a different size, you can edit the .f3d file. The parameters are labelled in the user parameters section. I suggest printing with 3+ perimeters, no top/bottom layers and around 25% honeycomb infill, depending on your desired look. If for any reason you cannot edit the parameterized file, just drop a comment and I'll upload whatever size you need.