print in place Magnetic cable holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
print in place Magnetic cable holder so that the cable does not fall down and can be easily reached.
- Rating
- 5 / 5
- Likes
- 48
- Downloads
- 165
- Makes
- 1
- Views
- 719
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Printed with 0.2 mm layer height. Distance of the folding mechanism is 0.2 mm. The holder is mounted with double-sided adhesive tape or with 2 wood screws. The magnets are pressed in. If they do not hold glue them in place with some superglue.
Magnets: 2 x 6mm x 2.5mm
Screws: 2 x 3mm diameter, maximum screw head diameter 6mm.
**************************************************************************************************
gedruckt mit 0.2mm Schichthöhe. Abstand des Klappmechanismus ist 0.2 mm. Montiert wird der Halter mit doppelseitigem Klebeband oder mit 2 Holzschrauben. Die Magnete werden eingepresst. Falls sie nicht halten mit etwas Sekundenkleber festkleben.
Magnete: 2 mal 6mm x 2.5mm
Schrauben: 2 mal 3mm Durchmesser, Schraubenkopf maximal 6mm Durchmesser.