1 / 8
Prusa Enclosure Camera Arm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Articulated arm intended for the ESP32 camera
- Rating
- 4.5 / 5
- Likes
- 31
- Downloads
- 160
- Makes
- 1
- Views
- 1,217
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Compatible with the ESP32 camera case from @MichalFanta;
For design I used this model of the enclosure from @GiantBrain, thanks!!
Hardware you need:
- a couple of M3 bolts w/ nuts to secure the support to the enclosure
- M4 or M5 bolts to join the links, minimum length 20 mm with inserts or >20 mm with nuts.
On the photos the long arm and the elbows are printed:
- 5 perimeters
- no top layers
- no bottom layers
- honeycomb 20% infill
The ESP32 case shown in the photos is this one [LINK]
Tags
cameraarmenclosurearticulatedarticulationcameramountjointesp32esp32camprusaenclosurecamaracameraadapterarticulatedmodeljointedcameracoverenclousurecameraholderjointsenclosuremodificationesp32caseenclosurepartsenclosuremountbrazobrazomultipropositobrazosprusaenclosureupgradeprusaenclosuremodprusaenclosurecamerabrazoarticulado